Ru-Board.club
← Вернуться в раздел «Магнитные носители информации»

» 0x0000007B (0xFCFF5BB0, ..

Автор: woffer
Дата сообщения: 10.09.2004 14:42
Ситуация следущая:

(0xFCFF5BB0, 0xC000009C, 0x0.., 0x0.. 0

INACCESSIBLE_BOOT_DEVICE

Был IBM DDYS-T18350. Он не видится и не форматируется на двух 2 машинах. Ладно, думаю, умер.

Вставляю совершенно рабочий диск (Samsung IDE) с 2k c соседней машины - точно такая же ошибка.

Что произошло ?
Автор: Dekker
Дата сообщения: 11.09.2004 11:34
ты уверен что с памятью на машине все в порядке ?
Автор: Dr StandBy
Дата сообщения: 13.09.2004 21:38
woffer

Цитата:
0x0000007B or INACCESSIBLE_BOOT_DEVICE

The Stop 0x7B message indicates that Windows XP has lost access to the system partition or boot volume during the startup process. Installing incorrect device drivers when installing or upgrading storage adapter hardware typically causes stop 0x7B errors. Stop 0x7B errors could also indicate possible virus infection.

The second parameter is very important because it can indicate whether the 0x7B Stop message was caused by file system issues or problems with storage hardware and drivers. Values of 0xC000034 or 0xC000000E typically indicate:
Disks or storage controllers that are failing, defective, or improperly configured.
Storage-related drivers or programs (tape management software, for example) that are not fully compatible with Windows XP Professional.

Possible Resolutions:
During I/O system initialization, the controller or driver for the startup device (typically the hard disk) might have failed to initialize the necessary hardware. File system initialization might have failed because of disk or controller failure, or because the file system did not recognize the data on the boot device.
Repartitioning disks, adding new disks, or upgrading to a new disk controller might cause the information in the Boot.ini file, or Boot Manager, to become outdated. If this Stop message occurs after installing new disks to your system, edit the Boot.ini file or adjust the Boot Manager parameters to allow the system to start. If the error occurs after upgrading the disk controller, verify that the new hardware is functioning and correctly configured.
Verify that the system firmware and disk controller BIOS settings are correct and that the storage device was properly installed. If you are unsure, consult your computer's documentation about restoring default firmware settings or configuring your system to auto-detect settings. If the error occurs during Windows XP Professional setup, the problem might be due to unsupported disk controller hardware. In some cases, drivers for new hardware are not in the Windows XP Professional Driver.cab library, and you need to provide additional drivers to complete the Windows XP setup successfully. If this is the case, follow the hardware manufacturer's instructions when installing drivers. Periodically check for driver and firmware updates.
Hard disk corruption can also cause this Stop message. For more information about checking hard disk integrity, see the instructions provided in "Stop 0x00000024 or NTFS_FILE_SYSTEM" earlier in this list.
Problems that cause 0x7B errors might also cause Stop 0xED errors. For more information about 0xED Stop messages, see "Stop 0x0000007B or INACCESSIBLE_BOOT_DEVICE" later in this list.


Добавлено
еще одна полезная ссылочка - http://bsod.oszone.net/0x0000007b.shtml

Страницы: 1

Предыдущая тема: Слетел WD200JB


Форум Ru-Board.club — поднят 15-09-2016 числа. Цель - сохранить наследие старого Ru-Board, истории становления российского интернета. Сделано для людей.