Ru-Board.club
← Вернуться в раздел «Программы»

» Об особенностях создания загрузочного диска в EasyCDCreator

Автор: Urist
Дата сообщения: 10.10.2002 09:26
В Easy Cd Creatore 5.3.154sp4 есть опция создания BOOT CD. Для WINDOWSXPSP1 он создать может или есть особенности(чтобы не копировать всякие xpboot.bin неизвестного приосхожденияи т.п.)?

Смущает многообразие (выдержка из хелпа):
To make a Bootable CD:
1.Insert a blank CD into your CD-Recorder (the destination drive).

2.Start a new bootable CD project. From the File menu, point to New CD Project then select Bootable CD. The Choose Type of Bootable CD dialog box appears.

3.Select the Bootable CD Type:

·Floppy Disk Emulation (1.44 MB): Select this option if you want a bootable CD that allows you to boot your system under a specific operating system, and then load a device driver that understands the true format of the CD, usually ISO 9660. (Requires a bootable floppy disk. See Create a Bootable Floppy Disk.)

·Floppy Disk Emulation (2.88 MB): Select this option if you want a bootable CD that allows you to boot your system under a specific operating system, and then load a device driver that understands the true format of the CD, usually ISO 9660. (Requires a bootable floppy disk. See Create a Bootable Floppy Disk.)

·Hard Disk Emulation: Select this option if you want to provide a large MS-DOS compatible CD-ROM storage space on which programs may reside and access data.

·No Emulation: Select this option if you do not want the CD to emulate a floppy or hard disk.

4.Select the emulation appropriate for the Bootable CD Type selected above.

5.Click OK. Follow any on-screen instructions that may appear.

6.When the bootable CD project appears, use Easy CD Creator as you normally would for making a data CD.

Note: When the CD has been made, take it to the system you want to boot from. Make sure it has bootable CD-ROM support enabled, insert the bootable CD in your CD-ROM drive, and reboot the system. If you are able to start your system from the bootable CD, you have successfully made a bootable CD.

Автор: PoiSoN
Дата сообщения: 10.10.2002 15:46
Тебе сюда:
http://www.windowsxp.nu/bootcd/default.htm
Автор: Nep
Дата сообщения: 13.10.2002 21:55
Urist
http://forum.ru-board.com/topic.cgi?forum=5&topic=1651#1

Страницы: 1

Предыдущая тема: Art Tray 1.0


Форум Ru-Board.club — поднят 15-09-2016 числа. Цель - сохранить наследие старого Ru-Board, истории становления российского интернета. Сделано для людей.