Автор: LexVel
Дата сообщения: 03.03.2009 14:17
Denn29
чем можно включать функции в биос?
есть ли программы для его модификации?
мне нужно включить поддержку виртуализации,
биос:
BIOS-M3a-R2165M3 EP0000173552 18_02_2009,
[more]
;The file is Insydeflash utility configuration file
[Version]
Version=00
;Insydeflash utility will display the value at top
[FDFile]
FileName=R2165M3.ROM
BackupName=
;FileName -> Utility always load this file.
;BackupName -> Utility will backup current BIOS to the file.
[UpdateBlock]
PatchFv=0
FileName=intel.fv
FileOffset=0
FlashSize=0
PhysicalAddress=FFF00000
FvID=945PL-A
IDErrorAction=1
;If user set PatchFv to 1, utility will go update mode.
;If user only need to update some blocks in file, please enter file offset and size
;in here. If flash size is 0, utility will update all binary in file.
;If flag in Platform_Check section is 1, utility will compare FvID with current
;platform ID. When ID comparison failed, user choose result by IDErrorAction.
;1 mean show error message box, 2 mean close utility and reboot/shutdown.
[Platform_Check]
flag=0
PlatformName=
;This flag is the switch of comparing bios project id with rom file project id.
;When flag is 1, utility will check project id.If id doesn't match, utility will
;close the application. When flag is 0, utility won't check project id.
;PlatformName ->check platform name by .INI
[AC_Adapter]
flag=0
BatteryCheck=0
BatteryBound=20
;This flag is the switch of checking AC. When flag is 1, utility will check AC. If no AC
;plug in, utility will display warnning message. When flag is 0, utility won't check AC.
[Bios_Version_Check]
flag=0
;This flag is the switch of checking Bios Version. When flag is 1, utility will
;check Bios Version. If rom file Version is older than Bios, utility will display warnning
;message and close application. When flag is 0, utility won't check rom file version.
[ForceFlash]
ALL=1
BB_PEI=0
CPU_Microcode=0
Variable=0
DXE=0
EC=0
Password=0
OEM_NVS=0
Logo=0
Type#09=0
Type#08=0
;ALL 1 -> Flash all ROM part. 0 -> Resverd all protect areas.
;BB_PEI, CPU_Microcode, Variable...
;1 -> Force flash these area if BIOS report them are protected areas.
;0 -> Protect these area if BIOS report them are protected areas.
[FlashComplete]
Action=0
Dialog=0
Counter=15
;Action 0 -> Do nothing, 1 -> Shut down, 2 -> Reboot
;Dialog 0 -> Do not display dialog, 1 -> Display dialog,
; 2 -> Display dialog and wait several seconds.
;If user need to reboot or shut down automaticlly in several seconds,
;user can set counter be a integer.
[UI]
Confirm=0
Silent=1
DisplayID=0
InsydeInfo=1
VersionInfo=1
GroupInfo=1
ConfirmInfo=0
OnFlashingBeep=0
OnFlashingBeepDelayTime=800
DisableMouseAndKeyboardInput=0
BeforeFlashDelayTime=0
;Confirm 1 - > Display confirm dialog, 0 -> Do not display confirm dialog
;Silent 1 -> Silent mode, hide main dialog, 0 -> Normal mode
;DisplayID 1 -> Display BIOS ID, 0 -> Do not display BIOS ID
;InsydeInfo 1 -> Display Insyde copyright information and URL, 0 -> Do not display it
;VersionInfo 1 -> Display BIOS version, 0 -> Do not display BIOS version
;GroupInfo 1 -> Display group box, Do not display group box
;ConfirmInfo 1-> Display version and date information in confirm dialog
;OnFlashingBeep 1-> Beep on flashing, 0 ->Do not beep on flashing
;OnFlashingBeepDelayTime -> set BEEP delay time(Milliseconds)
;DisableMouseAndKeyboardInput 1-> Hook mouse and keyboard without "CTRL+ALT+DEL", 0 ->Do not Hook mouse and keyboard.
;BeforeFlashDelayTime ->If user need to delay begin flashing in several seconds, user can set delay time be a integer.
[Logo]
PatchLogo=0
FileName=
GUID=
[Others]
ClearCMOS=0
FlashDevice=1
DisableCompare=0
ErrorRetry=0
;FlashDevice 0 -> default, 1 -> SPI flash part, 2 -> Non-SPI flash part.
;DisableCompare 0 -> Compare binary, 1 -> Do not compare binary, flash directly in write ROM mode.
;ErrorRetry 0-> Do not retry if found flash error. 1 -> Try to flash again if write or verify error.
[Option]
Flag=0
;Flag 0-> Auto-flash mode.
;Flag 1-> User option mode, including option, start, exit buttons.
;Flag 2-> User flash mode, including start, exit buttons.
[ApplicatonFlash]
Flag=0
Model=
;Some specific platforms need to flash by application. Only support 32bit Windows.
;Flag 1-> Flash by application
;Flag 0-> Flash by BIOS
;Model is the name of the platform.
[ReturnErrorCode]
FileNotFound=3
ErrorBeforeFlash=4
[UpdateEC]
Flag=2
;0 -> Not flash EC by BIOS.
;1 -> Flash by BIOS now.
;2 -> Flash by BIOS after windows shutdown.
[Region]
BIOS=1
GbE=0
ME=0
DESC=0
[Log_file]
Flag=0
FileName=InsydeFlash.Log
;0 -> Not create log file
;1 -> create log file
[ReturnCodeDefinition]
RETURN_SUCCESSFUL=0
RETURN_MODEL_CHECK_FAIL=259
RETURN_USER_CONFIRM_CANCEL=1602
RETURN_AC_NOT_CONNECT=1602
RETURN_LOAD_DRIVER_FAIL=1602
RETURN_NEED_REBOOT=3010
RETURN_USER_EXIT=1602
[/more]
