» NirSoft USBDeview

Было бы неплохо прогу обучить запуску vbs-скриптов

%SystemRoot%\System32\WScript.exe "c:\start.vbs"

я не программист и экзешник требуемый не напишу

а батники\смдешники светятся окном cmd.

Саму прогу при вкл компа можно спрятать запуском из вбс.

что мешает запускать так: %SystemRoot%\System32\WScript.exe "c:\start.vbs"

компилировать из vbs exe - ? это как-то странно...

а если попробовать это...

через GPO? Но ведь интерфейс то будет отбражаться в системной трее...

Added 'Mark Odd/Even Rows' option, under the View menu. When it's turned on, the odd and even rows are displayed in different color, to make it easier to read a single line.

Improved the detection of the 'Last Plug/Unplug Date' value

For USB To Serial devices, USBDeview now displays the port name (Com1, Com2, Com3,...), if it's stored in the Registry. The port name is displayed on the 'Drive Letter' column.

Added 'Turn Off Device On Disable/Remove' option, only for Windows 7/2008/Vista. As opposed to Windows XP, Windows 7/2008/Vista doesn't turn off the USB device when you disable or 'Safely Remove' the device. This new option make a small Registry change to make Windows 7/2008/Vista behave like Windows XP and turn off the device after disable or 'Safely Remove' action.
For more information: USB Port Remains Active for Disabled or Safely Removed USB Device.
Be aware that this change takes effect only after reboot, and requires full admin rights (execute USBDeview.exe with 'Run As Administrator')

Added 'Turn Off Device On Disable/Remove' option, only for Windows 7/2008/Vista.

Added 'USB Version' column, which displays the USB version of the device. This column is active only when 'Retrieve USB Power/Version Information' option is turned on.

Versions History
================


* Version 2.00
o Changed the USB status icons so it'll be much easier to
distinguish between them, especially on small LCD monitors.

Versions History
================


* Version 2.05
o Fixed the speed test error messages of USB 3.0 devices. Also, you
can now submit the speed tests of USB 3.0 devices to
http://usb3speed.nirsoft.net Web site

Versions History
================


* Version 2.06
o Fixed bug: USBDeview freezed for a few seconds if there was a
disconnected network drive on the system.

Versions History
================


* Version 2.10
o Fixed the 'Last Plug/Unplug Date' value on Windows 7.
o Fixed the 'Device Mfg' value on Windows 7.

Versions History
================


* Version 2.11
o Fixed USBDeview to detect the version/power information of Etron
USB 3.0 host controller, and possibly other USB host controllers.

Versions History
================


* Version 2.12
o Fixed issue: USBDeview failed to detect some devices as
connected, even if they were connected.

Versions History
================


* Version 2.15
o Added 'Auto Size Columns+Headers' option, which allows you to
automatically resize the columns according to the row values and
column headers.
o Fixed issue: The properties and the options windows opened in the
wrong monitor, on multi-monitors system.

Versions History
================


* Version 2.16
o Added new variable to the execute command option: %usb_version%

Versions History
================


* Version 2.17
o Fixed bug: When plugging 2 USB devices with the same pid/vid,
USBDeview disabled/enabled/removed the wrong device.

Versions History
================


* Version 2.18
o Fixed issue: The %drive% variable returned empty string for USB
to serial devices.

Versions History
================


* Version 2.21
o You can now use the disable/enable/remove command-line options
according to the com number of a USB to serial device. For example:
USBDeview.exe /disable_by_drive com62

Versions History
================


* Version 2.22
o Fixed USBDeview to add header line to the csv/tab-delimited files
when exporting the USB information from command-line. In order to add
the header line, you can use the /AddExportHeaderLine command-line
option, or simply turn on the 'Add Header Line To CSV/Tab-Delimited
File' option from the user interface.

· Added new command-line options to disable and then enable again a device: /disable_enable, /disable_enable_by_serial , /disable_enable_by_drive , /disable_enable_by_class , /disable_enable_by_pid , /disable_enable_all
· You can now specify the device Instance ID string in the following command-line options: /disable, /enable, /remove, /disable_enable, /stop
· You can now use the disable/enable/uninstall features on Windows Vista/7/8 (with UAC turned on) without running USBDeview.exe as Administrator. Elevation window will appear to confirm every action.

Versions History
================


* Version 2.26
o Update for Windows 7/8/Vista/2008: USBDeview now extracts the
real device name directly from hardware when the device is connected
and the 'Retrieve USB Power/Version Information' option is turned on.

Versions History
================


* Version 2.27
o You can now use the 'Open In RegEdit' features on Windows
Vista/7/8 (with UAC turned on) without running USBDeview.exe as
Administrator. Elevation window will appear to confirm every action.

Versions History
================

Version 2.28
Fixed to display date/time values according to daylight saving time settings.

Versions History
================


* Version 2.29
o Fixed to display the correct Power value of USB 3.0 devices.

Versions History
================


* Version 2.30
o Fixed bug on Windows Vista/7/8 with UAC turned on: USBDeview
failed to remove USB devices when running without elevation.

Versions History
================


* Version 2.35
o Added 'Reload USB Hub' option (Ctrl+R). When you select a USB hub
item and use the 'Reload USB Hub' option, all USB devices connected
to this hub are reconnected, including USB devices that you
previously disconnected. Be aware that in order to use this option,
you also have to turn on the 'Show USB Hubs' option (Ctrl+F7).