Цитата: 4-Error:ROMAN file ROMID is not compatible with existing BIOS ROMID
Биос не от вашей модели/модификации.
Ну как там обычно пишут: производитель имеет право изменить без уведомления, и т.д. и т.п...
Если уверены, что этот БИОС точно подойдет, можете на свой страх и риск прошиться с ключом /X:
Код: AFUDOS v4.xx
Commands:
| /O - Save current BIOS into file
| /U - Display ROM file's ROMID
| /Ln - Refer to Options: /Ln
| /M - Refer to Options: /M
| /MAI - Disaply System ROM and ROM file's MA information
| /HOLE: - Update specific ROM Hole according to given name.
| NewRomHole1.BIN /HOLE:RomH1
| /HOLEOUT: - Save specific ROM Hole according to given name.
| NewRomHole1.BIN /HOLE:RomH1
| /D - Verification test of given ROM File without flashing BIOS.
| /EC - Flash EC firmware BIOS (Refer to OFBD Spec)
| /NCB - Flash NCB Area (Refer to OFBD Spec)
| /NCBOUT - Output NCB Data according to given name.
| Options:
| /P - Program main BIOS image
| /B - Program Boot Block
| /N - Program NVRAM
| /C - Destroy CMOS checksum
| /E - Program Embedded Controller Block
| /K - Program all non-critical blocks
| /Kn - Program n'th non-critical block only(n=0-7)
| /Q - Silent execution
| /REBOOT - Reboot after programming
| /X - Don't Check ROM ID | /S - Display current system's ROMID
| /Ln - Load CMOS defaults:(n=0-3)
| L0: Load current optimal
| L1: Load current failsafe
| L2: Load optimal from ROM file
| L3: Load failsafe from ROM file
| /M - Update bootblock MAC address if it exists
| Example: /M1234ABCD will update MAC to 1234ABCD
| /R - Preserve ALL SMBIOS structure during NVRAM programming
| /ECUF - Update EC BIOS when newer version is detected.
| /SHUTDOWN - Shutdown after programming.