При включении ждущего режима не происходит отключение вентиляторов процессора, видеокарты - ECS P4M800-M7 (v. 3.1). Что можно сделать, чтобы кулера отключались? Или только в спящем режиме они отключаются? Тогда как его активизировать? (иконка есть на панельке, но она затемнена). Где искать причину в биосе или в ОС?
Системная плата ECS P4M800-M7 (3 PCI, 1 AGP, 1 CNR, 2 DDR DIMM, Audio, Video, LAN)
Тип ЦП Intel Pentium 4 630, 3000 MHz (15 x 200)
Видеоадаптер ATI Radeon HD 3800 Series (512 Мб)
RAM 1024Mb (PC3200 DDR SDRAM)
USB-клавиатура (Клавиатура HID )
Мышь Microsoft PS/2 мышь
Тип BIOS AMI
Версия BIOS 080012
Дата системной BIOS 06/23/06
Дата BIOS видеоадаптера 03/17/08
Тип BIOS AMI (06/23/06)
ОС windows XP Pro SP3 (simplix edition )
В Биосе в Power Mangement Setup включены:
ACPI Aware O/S - yes
Power Management - enabled
ACPI Enhanced Efficiency- enabled
Suspend Time Out - 30 min
Keyboard Power On/Wake-Up Key - power key
(остальные установки - не активны)
страница из мануала о энергосбережении в Биос
http://i8.fastpic.ru/big/2010/0808/96/3dd72fe3ae2697257f4f07355b06dd96.jpg
текст этой страницы ниже, можно перевести в гугле.
ACPI Aware O/S
This itme supports ACPI (Advanced Configuraion and Power Management Interface). Use
this item to enable or disable the ACPI feature.
Power Management
Use this item to enable or disable a power management scheme. If you enable power
management, you can use this item below to set the power management operation. Both
APM and ACPI are supported.
ACPI Enhanced Efficiency
Use this item to enable or disable the function of ACPI enhanced efficiency.
Suspend Time Out
This item sets up the timeout for Suspend mode in minutes. If the time selected passes
without any system activity, the computer will enter power-saving Suspend mode.
Resume on RTC Alarm
The system can be turned off with a software command. If you enable this item, the system
can automatically resume at a fixed time based on the system’s RTC (realtime clock). Use
the items below this one to set the date and time of the wake-up alarm. You must use an ATX
power supply in order to use this feature.
LAN/Ring Power On
The system can be turned off with a software command. If you enable this item, the system
can automatically resume if there is an incoming call on the Modem/
Ring, or traffic on the network adapter. You must use an ATX power supply in order
to use this feature.
Keyboard Power On/Wake-Up Key
If you enable this item, the system can automatically resume by pressing any keys, hot key,
power key on the keyboard, or typing in the password. You must use an ATX power supply
in order to use this feature.
Системная плата ECS P4M800-M7 (3 PCI, 1 AGP, 1 CNR, 2 DDR DIMM, Audio, Video, LAN)
Тип ЦП Intel Pentium 4 630, 3000 MHz (15 x 200)
Видеоадаптер ATI Radeon HD 3800 Series (512 Мб)
RAM 1024Mb (PC3200 DDR SDRAM)
USB-клавиатура (Клавиатура HID )
Мышь Microsoft PS/2 мышь
Тип BIOS AMI
Версия BIOS 080012
Дата системной BIOS 06/23/06
Дата BIOS видеоадаптера 03/17/08
Тип BIOS AMI (06/23/06)
ОС windows XP Pro SP3 (simplix edition )
В Биосе в Power Mangement Setup включены:
ACPI Aware O/S - yes
Power Management - enabled
ACPI Enhanced Efficiency- enabled
Suspend Time Out - 30 min
Keyboard Power On/Wake-Up Key - power key
(остальные установки - не активны)
страница из мануала о энергосбережении в Биос
http://i8.fastpic.ru/big/2010/0808/96/3dd72fe3ae2697257f4f07355b06dd96.jpg
текст этой страницы ниже, можно перевести в гугле.
ACPI Aware O/S
This itme supports ACPI (Advanced Configuraion and Power Management Interface). Use
this item to enable or disable the ACPI feature.
Power Management
Use this item to enable or disable a power management scheme. If you enable power
management, you can use this item below to set the power management operation. Both
APM and ACPI are supported.
ACPI Enhanced Efficiency
Use this item to enable or disable the function of ACPI enhanced efficiency.
Suspend Time Out
This item sets up the timeout for Suspend mode in minutes. If the time selected passes
without any system activity, the computer will enter power-saving Suspend mode.
Resume on RTC Alarm
The system can be turned off with a software command. If you enable this item, the system
can automatically resume at a fixed time based on the system’s RTC (realtime clock). Use
the items below this one to set the date and time of the wake-up alarm. You must use an ATX
power supply in order to use this feature.
LAN/Ring Power On
The system can be turned off with a software command. If you enable this item, the system
can automatically resume if there is an incoming call on the Modem/
Ring, or traffic on the network adapter. You must use an ATX power supply in order
to use this feature.
Keyboard Power On/Wake-Up Key
If you enable this item, the system can automatically resume by pressing any keys, hot key,
power key on the keyboard, or typing in the password. You must use an ATX power supply
in order to use this feature.