» Настройка Arch Linux 2009.02

После того, как настроил VPN, сразу поставил alsa, xorg и проприетарные драйвера ATi (9.2).
После команды xinit появляется xterm и система перестает реагировать на нажатия клавиш, после startx -- несколько окон и тоже никакой реакции на нажатия.
Подскажите, в чем может быть дело?

Добавлено:
С radeonhd тоже самое.

та же проблема на Nvidia 8600, еще пробовал настроить под vmware., но все равно та же ситуация

Начиная с версии HAL 0.5.10 настройки клавиатуры в xorg.conf игнорируются. Для настройки используйте средства самого HAL. Создайте файл /etc/hal/fdi/policy/10-keymap.fdi такого содержания:

<?xml version="1.0" encoding="utf-8"?>
<deviceinfo version="0.2">
<device>
<match key="info.capabilities" contains="input.keypad">
<merge key="input.xkb.rules" type="string">base</merge>
<merge key="input.xkb.model" type="string">pc105</merge>
<merge key="input.x11_driver" type="string">evdev</merge>
<merge key="input.xkb.layout" type="string">us,ru</merge>
<merge key="input.xkb.variant" type="string">,winkeys</merge>
<merge key="input.xkb.options" type="string">grp:rctrl_toggle</merge>
</match>
</device>
</deviceinfo>

Очень хорошо расписано здесь:

http://wiki.archlinux.org/index.php/HAL
http://wiki.archlinux.org/index.php/Xorg_(Русский)

Пожалуй, уместнее всего задать вопрос в этой теме. Поставил свежий Arch Linux (i686), никак не заводится звук (ALSA). Пробовал делать alsaconf (и исправлять ручками последствия его кривой работы, точнее, неприспособленности к Arch Linux), пробовал блокировать загрузку некоторых модулей, что помогало многим, - безрезультатно. [more]
$ lspci | grep Audio
00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 02)

$ lsmod | grep snd
snd_hda_codec_realtek 179240 1
snd_hda_codec_si3054 3094 1
snd_seq_dummy 1099 0
snd_seq_oss 25304 0
snd_seq_midi_event 4452 1 snd_seq_oss
snd_seq 42628 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi_event
snd_seq_device 4313 3 snd_seq_dummy,snd_seq_oss,snd_seq
snd_pcm_oss 33693 0
snd_mixer_oss 14810 1 snd_pcm_oss
snd_hda_intel 18697 0
snd_hda_codec 56728 3 snd_hda_codec_realtek,snd_hda_codec_si3054,snd_hda_intel
snd_hwdep 5102 1 snd_hda_codec
snd_pcm 57479 4 snd_hda_codec_si3054,snd_pcm_oss,snd_hda_intel,snd_hda_codec
snd_timer 16117 2 snd_seq,snd_pcm
snd 43847 12 snd_hda_codec_realtek,snd_hda_codec_si3054,snd_seq_oss,snd_seq,snd_seq_device,snd_pcm_oss,snd_mixer_oss,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_timer
soundcore 5007 1 snd
snd_page_alloc 5809 2 snd_hda_intel,snd_pcm

В общем-то, модули загружены правильные.

alsaconf добавляет в /etc/modprobe.d/sound следующие строчки:

alias snd-card-0 snd-hda-intel
alias sound-slot-0 snd-hda-intel


$ cat /etc/rc.conf | grep MODULES
# MODULES: Modules to load at boot-up. Prefix with a ! to blacklist.
# NOTE: Use of 'MOD_BLACKLIST' is deprecated. Please use ! in the MODULES array.
MODULES=(!snd_pcsp)

[/more]
Можно ли тут чем помочь?

Подниму тему. По всей видимости, в описанной выше виновато ядро 2.6.32 - в нем работу звука для моей карточки поломали, похоже (после обновления ядра в Fedora звук пропал; вывод напрашивается; кстати, видел где-то описание похожего бага и для Ubuntu).

Попытка подсунуть системе самостоятельно скомпилированное ядро 2.6.31.12 с kernel.org приводит почему-то к плачевным последствиям - стартовые скрипты выполняются как попало, со сбоями, GDM не запускается, в логах ничего определенного не нашел. Есть какие-нибудь идеи, куда копать и в чем может быть дело? Или ну его к лешему, этот Arch Linux?

Какая звуковая карта? Встроенная или pci?

Jokerjar79
Выше, под тегом [no][more][/no] написано - карточка встроенная Intel HDA. Ну вот даже ещё [more]bash-4.0$ cat /proc/asound/Intel/codec#1
Codec: Realtek ALC861
Address: 1
Function Id: 0x1
Vendor Id: 0x10ec0861
Subsystem Id: 0x15840000
Revision Id: 0x100300
No Modem Function Group found
Default PCM:
rates [0x140]: 48000 96000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Default Amp-In caps: N/A
Default Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
GPIO: io=0, o=0, i=0, unsolicited=0, wake=0
Node 0x03 [Audio Output] wcaps 0x405: Stereo Amp-Out
Amp-Out caps: N/A
Amp-Out vals: [0x00 0x00]
Converter: stream=0, channel=0
Power: setting=D0, actual=D0
Node 0x04 [Audio Output] wcaps 0x405: Stereo Amp-Out
Amp-Out caps: N/A
Amp-Out vals: [0x80 0x80]
Converter: stream=0, channel=0
Power: setting=D0, actual=D0
Node 0x05 [Audio Output] wcaps 0x405: Stereo Amp-Out
Amp-Out caps: N/A
Amp-Out vals: [0x80 0x80]
Converter: stream=0, channel=0
Power: setting=D0, actual=D0
Node 0x06 [Audio Output] wcaps 0x405: Stereo Amp-Out
Amp-Out caps: N/A
Amp-Out vals: [0x80 0x80]
Converter: stream=0, channel=0
Power: setting=D0, actual=D0
Node 0x07 [Audio Output] wcaps 0x605: Stereo Digital Amp-Out
Amp-Out caps: N/A
Amp-Out vals: [0x00 0x00]
Converter: stream=0, channel=0
Digital:
Digital category: 0x0
Power: setting=D0, actual=D0
Node 0x08 [Audio Input] wcaps 0x10051b: Stereo Amp-In
Amp-In caps: ofs=0x02, nsteps=0x0d, stepsize=0x0b, mute=1
Amp-In vals: [0x0d 0x0d] [0x0d 0x0d] [0x0d 0x0d] [0x0d 0x0d] [0x0d 0x0d] [0x0d 0x0d]
Converter: stream=0, channel=0
SDI-Select: 0
PCM:
rates [0x140]: 48000 96000
bits [0x2]: 16
formats [0x1]: PCM
Power: setting=D0, actual=D0
Connection: 6
0x0d* 0x0c 0x0f 0x10 0x11 0x15
Node 0x09 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x0a [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x0b [Pin Complex] wcaps 0x400581: Stereo
Pincap 0x0000001f: OUT HP Detect Trigger ImpSense
Pin Default 0x01014110: [Jack] Line Out at Ext Rear
Conn = 1/8, Color = Green
DefAssociation = 0x1, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x40: OUT
Unsolicited: tag=00, enabled=0
Power: setting=D0, actual=D0
Connection: 1
0x16
Node 0x0c [Pin Complex] wcaps 0x400581: Stereo
Pincap 0x00000037: IN OUT Detect Trigger ImpSense
Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
Conn = 1/8, Color = Black
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x20: IN
Unsolicited: tag=00, enabled=0
Power: setting=D0, actual=D0
Connection: 1
0x19
Node 0x0d [Pin Complex] wcaps 0x400581: Stereo
Pincap 0x00000337: IN OUT Detect Trigger ImpSense
Vref caps: HIZ 50
Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
Conn = 1/8, Color = Black
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x20: IN VREF_HIZ
Unsolicited: tag=00, enabled=0
Power: setting=D0, actual=D0
Connection: 1
0x18
Node 0x0e [Pin Complex] wcaps 0x400581: Stereo
Pincap 0x00000017: OUT Detect Trigger ImpSense
Pin Default 0x99030120: [Fixed] Line Out at Int ATAPI
Conn = ATAPI, Color = Unknown
DefAssociation = 0x2, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x40: OUT
Unsolicited: tag=00, enabled=0
Power: setting=D0, actual=D0
Connection: 1
0x19
Node 0x0f [Pin Complex] wcaps 0x400581: Stereo
Pincap 0x0000033f: IN OUT HP Detect Trigger ImpSense
Vref caps: HIZ 50
Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
Conn = 1/8, Color = Black
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x40: OUT VREF_HIZ
Unsolicited: tag=00, enabled=0
Power: setting=D0, actual=D0
Connection: 1
0x1a
Node 0x10 [Pin Complex] wcaps 0x400581: Stereo
Pincap 0x0000033f: IN OUT HP Detect Trigger ImpSense
Vref caps: HIZ 50
Pin Default 0x01a1994e: [Jack] Mic at Ext Rear
Conn = 1/8, Color = Pink
DefAssociation = 0x4, Sequence = 0xe
Misc = NO_PRESENCE
Pin-ctls: 0x21: IN VREF_50
Unsolicited: tag=00, enabled=0
Power: setting=D0, actual=D0
Connection: 1
0x1b
Node 0x11 [Pin Complex] wcaps 0x400001: Stereo
Pincap 0x00000063: IN Balanced Trigger ImpSense
Pin Default 0x99330140: [Fixed] CD at Int ATAPI
Conn = ATAPI, Color = Unknown
DefAssociation = 0x4, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x00:
Node 0x12 [Pin Complex] wcaps 0x400301: Stereo Digital
Pincap 0x00000010: OUT
Pin Default 0x01454130: [Jack] SPDIF Out at Ext Rear
Conn = Optical, Color = Green
DefAssociation = 0x3, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x40: OUT
Connection: 1
0x07
Node 0x13 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x14 [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-In vals: [0x00 0x00] [0x00 0x00]
Connection: 2
0x0d 0x10
Node 0x15 [Audio Mixer] wcaps 0x20050f: Stereo Amp-In Amp-Out
Amp-In caps: ofs=0x0c, nsteps=0x17, stepsize=0x0b, mute=1
Amp-In vals: [0x05 0x05] [0x00 0x00] [0x00 0x00]
Amp-Out caps: ofs=0x0c, nsteps=0x0c, stepsize=0x0b, mute=1
Amp-Out vals: [0x0c 0x0c]
Power: setting=D0, actual=D0
Connection: 3
0x11 0x14 0x1c
Node 0x16 [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-In vals: [0x00 0x00] [0x00 0x00]
Connection: 2
0x03 0x15
Node 0x17 [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-In vals: [0x00 0x00] [0x00 0x00]
Connection: 2
0x04 0x15
Node 0x18 [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-In vals: [0x00 0x00] [0x00 0x00]
Connection: 2
0x05 0x15
Node 0x19 [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-In vals: [0x00 0x00] [0x00 0x00]
Connection: 2
0x06 0x15
Node 0x1a [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-In vals: [0x80 0x80] [0x80 0x80] [0x00 0x00] [0x00 0x00]
Connection: 4
0x04 0x06 0x15 0x03
Node 0x1b [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-In vals: [0x80 0x80] [0x80 0x80] [0x00 0x00] [0x00 0x00]
Connection: 4
0x04 0x06 0x15 0x03
Node 0x1c [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-In vals: [0x00 0x00] [0x00 0x00]
Connection: 2
0x0c 0x0f
Node 0x1d [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x1e [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x1f [Pin Complex] wcaps 0x400581: Stereo
Pincap 0x00000017: OUT Detect Trigger ImpSense
Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
Conn = 1/8, Color = Black
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x40: OUT
Unsolicited: tag=00, enabled=0
Power: setting=D0, actual=D0
Connection: 1
0x18
Node 0x20 [Pin Complex] wcaps 0x400581: Stereo
Pincap 0x00000017: OUT Detect Trigger ImpSense
Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
Conn = 1/8, Color = Black
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x40: OUT
Unsolicited: tag=00, enabled=0
Power: setting=D0, actual=D0
Connection: 1
0x17
Processing Coefficient: 0x00
Coefficient Index: 0x00
Node 0x21 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x22 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x23 [Beep Generator Widget] wcaps 0x70000c: Mono Amp-Out
Amp-Out caps: ofs=0x0f, nsteps=0x0f, stepsize=0x0b, mute=1
Amp-Out vals: [0x8f]
[/more]

Да, конкретно сейчас я сижу на Fedora со старым ядром, для диагностических целей, если нужно, думаю, достаточно просто поставить новое, заводить снова Arch мне лениво.

А как выражается проблема? Звук отсутствует? Ошибки? В alsamixer были?

Jokerjar79

Цитата:

Звук отсутствует?

Цитата:

В alsamixer были?

Да.

Цитата:

Ошибки?

Ну вот сейчас в dmesg я вижу по поводу своей карточки нечто вменяемое разве что в таком роде:


Цитата:

hda_codec: ALC861: BIOS auto-probing.
ALSA sound/pci/hda/hda_codec.c:3881: autoconfig: line_outs=1 (0xb/0x0/0x0/0x0/0x0)
ALSA sound/pci/hda/hda_codec.c:3885: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
ALSA sound/pci/hda/hda_codec.c:3889: hp_outs=0 (0x0/0x0/0x0/0x0/0x0)
ALSA sound/pci/hda/hda_codec.c:3890: mono: mono_out=0x0
ALSA sound/pci/hda/hda_codec.c:3893: dig-out=0x12/0x0
ALSA sound/pci/hda/hda_codec.c:3901: inputs: mic=0x10, fmic=0x0, line=0x0, fline=0x0, cd=0x11, aux=0x0
ALSA sound/pci/hda/patch_realtek.c:1284: realtek: No valid SSID, checking pincfg 0x00000000 for NID 0x1d
ALSA sound/pci/hda/patch_realtek.c:1364: realtek: Enable default setup for auto mode as fallback

На всякий случай, вот весь вывод [more=dmesg]Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.32.10-90.fc12.i686 (mockbuild@x86-07.phx2.fedoraproject.org) (gcc version 4.4.3 20100127 (Red Hat 4.4.3-4) (GCC) ) #1 SMP Tue Mar 23 10:21:29 UTC 2010
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
NSC Geode by NSC
Cyrix CyrixInstead
Centaur CentaurHauls
Transmeta GenuineTMx86
Transmeta TransmetaCPU
UMC UMC UMC UMC
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000dc000 - 00000000000e0000 (reserved)
BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000003f690000 (usable)
BIOS-e820: 000000003f690000 - 000000003f69d000 (ACPI data)
BIOS-e820: 000000003f69d000 - 000000003f700000 (ACPI NVS)
BIOS-e820: 000000003f700000 - 0000000040000000 (reserved)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
DMI present.
last_pfn = 0x3f690 max_arch_pfn = 0x100000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-CFFFF write-protect
D0000-DFFFF uncachable
E0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000 mask FC0000000 write-back
1 base 03F700000 mask FFFF00000 uncachable
2 base 03F800000 mask FFF800000 uncachable
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
PAT not supported by CPU.
original variable MTRRs
reg 0, base: 0GB, range: 1GB, type WB
reg 1, base: 1015MB, range: 1MB, type UC
reg 2, base: 1016MB, range: 8MB, type UC
total RAM covered: 1015M
Found optimal setting for mtrr clean up
gran_size: 64K     chunk_size: 16M     num_reg: 3     lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 1GB, type WB
reg 1, base: 1015MB, range: 1MB, type UC
reg 2, base: 1016MB, range: 8MB, type UC
initial memory mapped : 0 - 01000000
init_memory_mapping: 0000000000000000-00000000373fe000
Using x86 segment limits to approximate NX protection
0000000000 - 0000400000 page 4k
0000400000 - 0037000000 page 2M
0037000000 - 00373fe000 page 4k
kernel direct mapping tables up to 373fe000 @ 7000-d000
RAMDISK: 37522000 - 37fef199
Allocated new RAMDISK: 00b37000 - 01604199
Move RAMDISK from 0000000037522000 - 0000000037fef198 to 00b37000 - 01604198
ACPI: RSDP 000f78b0 00014 (v00 MSTEST)
ACPI: RSDT 3f6978f6 00044 (v01 MSTEST Capell00 06040000 LTP 00000000)
ACPI: FACP 3f69ce20 00074 (v01 INTEL CALISTGA 06040000 LOHR 0000005A)
ACPI: DSDT 3f69852f 048F1 (v01 UW____ F34_____ 06040000 INTL 20050624)
ACPI: FACS 3f69dfc0 00040
ACPI: APIC 3f69ce94 00068 (v01 INTEL CALISTGA 06040000 LOHR 0000005A)
ACPI: HPET 3f69cefc 00038 (v01 INTEL CALISTGA 06040000 LOHR 0000005A)
ACPI: MCFG 3f69cf34 0003C (v01 INTEL CALISTGA 06040000 LOHR 0000005A)
ACPI: APIC 3f69cf70 00068 (v01 PTLTD ? APIC 06040000 LTP 00000000)
ACPI: BOOT 3f69cfd8 00028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001)
ACPI: SSDT 3f698325 0020A (v01 SataRe SataAhci 00001000 INTL 20050624)
ACPI: SSDT 3f69793a 004F6 (v01 PmRef CpuPm 00003000 INTL 20050624)
ACPI: BIOS bug: multiple APIC/MADT found, using 0
ACPI: If "acpi_apic_instance=2" works better, notify linux-acpi@vger.kernel.org
ACPI: DMI BIOS year==0, assuming ACPI-capable machine
ACPI: Local APIC address 0xfee00000
130MB HIGHMEM available.
883MB LOWMEM available.
mapped low ram: 0 - 373fe000
low ram: 0 - 373fe000
node 0 low ram: 00000000 - 373fe000
node 0 bootmap 0000a000 - 00010e80
(9 early reservations) ==> bootmem [0000000000 - 00373fe000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
#2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
#3 [0000400000 - 0000b318d8] TEXT DATA BSS ==> [0000400000 - 0000b318d8]
#4 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000]
#5 [0000b32000 - 0000b36114] BRK ==> [0000b32000 - 0000b36114]
#6 [0000007000 - 000000a000] PGTABLE ==> [0000007000 - 000000a000]
#7 [0000b37000 - 0001604199] NEW RAMDISK ==> [0000b37000 - 0001604199]
#8 [000000a000 - 0000011000] BOOTMAP ==> [000000a000 - 0000011000]
found SMP MP-table at [c00f7960] f7960
Zone PFN ranges:
DMA 0x00000000 -> 0x00001000
Normal 0x00001000 -> 0x000373fe
HighMem 0x000373fe -> 0x0003f690
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
0: 0x00000000 -> 0x0000009f
0: 0x00000100 -> 0x0003f690
On node 0 totalpages: 259631
free_area_init_node: node 0, pgdat c09b9260, node_mem_map c1606000
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 3967 pages, LIFO batch:0
Normal zone: 1736 pages used for memmap
Normal zone: 220470 pages, LIFO batch:31
HighMem zone: 262 pages used for memmap
HighMem zone: 33164 pages, LIFO batch:7
Using APIC driver default
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode: Flat. Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
SMP: Allowing 2 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 24
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000dc000
PM: Registered nosave memory: 00000000000dc000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 00000000000e4000
PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
Allocating PCI resources starting at 40000000 (gap: 40000000:a0000000)
Booting paravirtualized kernel on bare hardware
NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:2 nr_node_ids:1
PERCPU: Embedded 14 pages/cpu @c2000000 s34456 r0 d22888 u2097152
pcpu-alloc: s34456 r0 d22888 u2097152 alloc=1*4194304
pcpu-alloc: [0] 0 1
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 257601
Kernel command line: ro root=UUID=48b0e876-5e1f-49ab-bb57-bb0f952e599e LANG=ru_RU.UTF-8 KEYBOARDTYPE=pc KEYTABLE=us rhgb quiet
PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
allocated 5194560 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
Initializing HighMem for node 0 (000373fe:0003f690)
Memory: 1005324k/1038912k available (3675k kernel code, 32624k reserved, 2314k data, 548k init, 133704k highmem)
virtual kernel memory layout:
fixmap : 0xffad5000 - 0xfffff000 (5288 kB)
pkmap : 0xff400000 - 0xff800000 (4096 kB)
vmalloc : 0xf7bfe000 - 0xff3fe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf73fe000 ( 883 MB)
.init : 0xc09da000 - 0xc0a63000 ( 548 kB)
.data : 0xc0796e54 - 0xc09d9710 (2314 kB)
.text : 0xc0400000 - 0xc0796e54 (3675 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Hierarchical RCU implementation.
NR_IRQS:1280
Console: colour VGA+ 80x25
console [tty0] enabled
hpet clockevent registered
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
Fast TSC calibration using PIT
Detected 1599.941 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 3199.88 BogoMIPS (lpj=1599941)
Security Framework initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
Mount-cache hash table entries: 512
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 2048K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
CPU0: Thermal monitoring enabled (TM2)
using mwait in idle threads.
Performance Events: no PMU driver, software events only.
Checking 'hlt' instruction... OK.
ACPI: Core revision 20090903
ftrace: converting mcount calls to 0f 1f 44 00 00
ftrace: allocating 23010 entries in 46 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Genuine Intel(R) CPU T2050 @ 1.60GHz stepping 08
Booting processor 1 APIC 0x1 ip 0x6000
Initializing CPU#1
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 2048K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
CPU1: Thermal monitoring enabled (TM2)
CPU1: Genuine Intel(R) CPU T2050 @ 1.60GHz stepping 08
checking TSC synchronization [CPU#0 -> CPU#1]: passed.
Brought up 2 CPUs
Total of 2 processors activated (6399.83 BogoMIPS).
sizeof(vma)=84 bytes
sizeof(page)=32 bytes
sizeof(inode)=352 bytes
sizeof(dentry)=132 bytes
sizeof(ext3inode)=508 bytes
sizeof(buffer_head)=56 bytes
sizeof(skbuff)=184 bytes
sizeof(task_struct)=3256 bytes
CPU0 attaching sched-domain:
domain 0: span 0-1 level MC
groups: 0 1
CPU1 attaching sched-domain:
domain 0: span 0-1 level MC
groups: 1 0
devtmpfs: initialized
regulator: core version 0.5
Time: 16:54:53 Date: 04/05/10
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
PCI: MCFG area at e0000000 reserved in E820
PCI: Using MMCONFIG for extended config space
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: BIOS _OSI(Linux) query ignored
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: EC: GPE = 0x19, I/O: command/status = 0x66, data = 0x62
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:02.0: reg 10 32bit mmio: [0xb0080000-0xb00fffff]
pci 0000:00:02.0: reg 14 io port: [0x1800-0x1807]
pci 0000:00:02.0: reg 18 32bit mmio pref: [0xc0000000-0xcfffffff]
pci 0000:00:02.0: reg 1c 32bit mmio: [0xb0040000-0xb007ffff]
pci 0000:00:02.1: reg 10 32bit mmio: [0xb0100000-0xb017ffff]
pci 0000:00:1b.0: reg 10 64bit mmio: [0xf0000000-0xf0003fff]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: PME# disabled
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: PME# disabled
pci 0000:00:1d.0: reg 20 io port: [0x1820-0x183f]
pci 0000:00:1d.1: reg 20 io port: [0x1840-0x185f]
pci 0000:00:1d.2: reg 20 io port: [0x1860-0x187f]
pci 0000:00:1d.3: reg 20 io port: [0x1880-0x189f]
pci 0000:00:1d.7: reg 10 32bit mmio: [0xf0004000-0xf00043ff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH6 GPIO
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0068 (mask 0007)
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0200 (mask 000f)
pci 0000:00:1f.1: reg 10 io port: [0x00-0x07]
pci 0000:00:1f.1: reg 14 io port: [0x00-0x03]
pci 0000:00:1f.1: reg 18 io port: [0x00-0x07]
pci 0000:00:1f.1: reg 1c io port: [0x00-0x03]
pci 0000:00:1f.1: reg 20 io port: [0x1810-0x181f]
pci 0000:00:1f.2: reg 10 io port: [0x18d0-0x18d7]
pci 0000:00:1f.2: reg 14 io port: [0x18c4-0x18c7]
pci 0000:00:1f.2: reg 18 io port: [0x18c8-0x18cf]
pci 0000:00:1f.2: reg 1c io port: [0x18c0-0x18c3]
pci 0000:00:1f.2: reg 20 io port: [0x18b0-0x18bf]
pci 0000:00:1f.2: reg 24 32bit mmio: [0xf0004400-0xf00047ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
pci 0000:00:1f.3: reg 20 io port: [0x18e0-0x18ff]
pci 0000:00:1c.0: bridge io port: [0xf000-0xffff]
pci 0000:00:1c.0: bridge 32bit mmio: [0xfac00000-0xfebfffff]
pci 0000:05:00.0: reg 10 32bit mmio: [0xb0200000-0xb0200fff]
pci 0000:05:00.0: PME# supported from D0 D3hot D3cold
pci 0000:05:00.0: PME# disabled
pci 0000:05:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:00:1c.2: bridge 32bit mmio: [0xf7000000-0xf70fffff]
pci 0000:06:04.0: reg 10 32bit mmio: [0x000000-0x000fff]
pci 0000:06:04.0: reg 14 32bit mmio: [0xb0300000-0xb03007ff]
pci 0000:06:04.0: supports D1 D2
pci 0000:06:04.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:06:04.0: PME# disabled
pci 0000:06:04.2: reg 10 32bit mmio: [0xb0300800-0xb03008ff]
pci 0000:06:04.2: supports D1 D2
pci 0000:06:04.2: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:06:04.2: PME# disabled
pci 0000:06:04.3: reg 10 32bit mmio: [0xf0202000-0xf0202fff]
pci 0000:06:04.3: supports D1 D2
pci 0000:06:04.3: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:06:04.3: PME# disabled
pci 0000:06:05.0: reg 10 io port: [0x2000-0x20ff]
pci 0000:06:05.0: reg 14 32bit mmio: [0xb0300c00-0xb0300cff]
pci 0000:06:05.0: supports D1 D2
pci 0000:06:05.0: PME# supported from D1 D2 D3hot D3cold
pci 0000:06:05.0: PME# disabled
pci 0000:00:1e.0: transparent bridge
pci 0000:00:1e.0: bridge io port: [0x2000-0x2fff]
pci 0000:00:1e.0: bridge 32bit mmio: [0xf0200000-0xf02fffff]
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 1 *3 4 5 6 7 10 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 *7 10 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 *5 6 7 11 12 14 15)
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: old code would have set cacheline size to 32 bytes, but clflush_size = 64
PCI: pci_cache_line_size set to 64 bytes
pci 0000:05:00.0: BAR 0: no parent found for of device [0xb0200000-0xb0200fff]
pci 0000:05:00.0: BAR 0: can't allocate resource
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource tsc
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 11 devices
ACPI: ACPI bus type pnp unregistered
system 00:01: iomem range 0xe0000000-0xefffffff has been reserved
system 00:01: iomem range 0xfed14000-0xfed17fff has been reserved
system 00:01: iomem range 0xfed18000-0xfed18fff has been reserved
system 00:01: iomem range 0xfed19000-0xfed19fff has been reserved
system 00:01: iomem range 0xfed1c000-0xfed1ffff has been reserved
system 00:01: iomem range 0xfed20000-0xfed3ffff has been reserved
system 00:01: iomem range 0xfed40000-0xfed44fff has been reserved
system 00:01: iomem range 0xfed45000-0xfed8ffff has been reserved
system 00:04: iomem range 0xfed00000-0xfed003ff has been reserved
system 00:06: ioport range 0x200-0x20f has been reserved
system 00:06: ioport range 0x680-0x69f has been reserved
system 00:06: ioport range 0x800-0x80f has been reserved
system 00:06: ioport range 0x1000-0x107f has been reserved
system 00:06: ioport range 0x1180-0x11bf has been reserved
system 00:06: ioport range 0x1640-0x164f has been reserved
system 00:07: ioport range 0x6a0-0x6af has been reserved
system 00:07: ioport range 0x6b0-0x6ff has been reserved
pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
pci 0000:00:1c.0: IO window: 0xf000-0xffff
pci 0000:00:1c.0: MEM window: 0xfac00000-0xfebfffff
pci 0000:00:1c.0: PREFETCH window: 0x00000040000000-0x000000401fffff
pci 0000:00:1c.1: PCI bridge, secondary bus 0000:04
pci 0000:00:1c.1: IO window: 0x3000-0x3fff
pci 0000:00:1c.1: MEM window: 0x40200000-0x403fffff
pci 0000:00:1c.1: PREFETCH window: 0x00000040400000-0x000000405fffff
pci 0000:00:1c.2: PCI bridge, secondary bus 0000:05
pci 0000:00:1c.2: IO window: 0x4000-0x4fff
pci 0000:00:1c.2: MEM window: 0xf7000000-0xf70fffff
pci 0000:00:1c.2: PREFETCH window: 0x00000040600000-0x000000407fffff
pci 0000:00:1e.0: PCI bridge, secondary bus 0000:06
pci 0000:00:1e.0: IO window: 0x2000-0x2fff
pci 0000:00:1e.0: MEM window: 0xf0200000-0xf02fffff
pci 0000:00:1e.0: PREFETCH window: disabled
pci 0000:00:1c.0: enabling device (0000 -> 0003)
pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1c.1: enabling device (0000 -> 0003)
pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.1: setting latency timer to 64
pci 0000:00:1c.2: enabling device (0000 -> 0003)
pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:1c.2: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 0 io: [0x00-0xffff]
pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
pci_bus 0000:02: resource 0 io: [0xf000-0xffff]
pci_bus 0000:02: resource 1 mem: [0xfac00000-0xfebfffff]
pci_bus 0000:02: resource 2 pref mem [0x40000000-0x401fffff]
pci_bus 0000:04: resource 0 io: [0x3000-0x3fff]
pci_bus 0000:04: resource 1 mem: [0x40200000-0x403fffff]
pci_bus 0000:04: resource 2 pref mem [0x40400000-0x405fffff]
pci_bus 0000:05: resource 0 io: [0x4000-0x4fff]
pci_bus 0000:05: resource 1 mem: [0xf7000000-0xf70fffff]
pci_bus 0000:05: resource 2 pref mem [0x40600000-0x407fffff]
pci_bus 0000:06: resource 0 io: [0x2000-0x2fff]
pci_bus 0000:06: resource 1 mem: [0xf0200000-0xf02fffff]
pci_bus 0000:06: resource 3 io: [0x00-0xffff]
pci_bus 0000:06: resource 4 mem: [0x000000-0xffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
NET: Registered protocol family 1
pci 0000:00:02.0: Boot video device
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 11060k freed
Simple Boot Flag at 0x36 set to 0x1
apm: BIOS not found.
audit: initializing netlink socket (disabled)
type=2000 audit(1270486510.599:1): initialized
highmem bounce pool size: 64 pages
HugeTLB registered 4 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
msgmni has been set to 1725
SELinux: Registering netfilter hooks
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:1c.0: irq 24 for MSI/MSI-X
pcieport 0000:00:1c.0: setting latency timer to 64
pcieport 0000:00:1c.1: irq 25 for MSI/MSI-X
pcieport 0000:00:1c.1: setting latency timer to 64
pcieport 0000:00:1c.2: irq 26 for MSI/MSI-X
pcieport 0000:00:1c.2: setting latency timer to 64
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
pci-stub: invalid id string ""
ACPI: AC Adapter [AC0] (on-line)
input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
ACPI: Lid Switch [LID0]
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
ACPI: Power Button [PWRB]
input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
ACPI: Sleep Button [SLPB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
ACPI: Power Button [PWRF]
ACPI: SSDT 3f69807b 00221 (v01 PmRef Cpu0Ist 00003000 INTL 20050624)
ACPI: SSDT 3f697e30 001C6 (v01 PmRef Cpu0Cst 00003001 INTL 20050624)
Marking TSC unstable due to TSC halts in idle
processor LNXCPU:00: registered as cooling_device0
ACPI: SSDT 3f69829c 00089 (v01 PmRef Cpu1Ist 00003000 INTL 20050624)
ACPI: SSDT 3f697ff6 00085 (v01 PmRef Cpu1Cst 00003000 INTL 20050624)
Switching to clocksource hpet
processor LNXCPU:01: registered as cooling_device1
thermal LNXTHERM:01: registered as thermal_zone0
ACPI: Thermal Zone [THRM] (57 C)
isapnp: Scanning for PnP cards...
ACPI: Battery Slot [BAT0] (battery present)
isapnp: No Plug & Play device found
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
agpgart-intel 0000:00:00.0: Intel 945GM Chipset
agpgart-intel 0000:00:00.0: detected 7932K stolen memory
agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xc0000000
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
brd: module loaded
loop: module loaded
input: Macintosh mouse button emulation as /devices/virtual/input/input4
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
ahci 0000:00:1f.2: irq 27 for MSI/MSI-X
ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 1.5 Gbps 0x5 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part
ahci 0000:00:1f.2: setting latency timer to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
ata1: SATA max UDMA/133 irq_stat 0x00400040, connection status changed irq 27
ata2: DUMMY
ata3: SATA max UDMA/133 abar m1024@0xf0004400 port 0xf0004600 irq 27
ata4: DUMMY
ata_piix 0000:00:1f.1: version 2.13
ata_piix 0000:00:1f.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
ata_piix 0000:00:1f.1: setting latency timer to 64
scsi4 : ata_piix
scsi5 : ata_piix
ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1810 irq 14
ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1818 irq 15
Fixed MDIO Bus: probed
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ata6: port disabled. ignoring.
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1d.7: using broken periodic workaround
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf0004000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.32.10-90.fc12.i686 ehci_hcd
usb usb1: SerialNumber: 0000:00:1d.7
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001820
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: UHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.32.10-90.fc12.i686 uhci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001840
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.32.10-90.fc12.i686 uhci_hcd
usb usb3: SerialNumber: 0000:00:1d.1
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001860
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.32.10-90.fc12.i686 uhci_hcd
usb usb4: SerialNumber: 0000:00:1d.2
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1d.3: setting latency timer to 64
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.3: irq 16, io base 0x00001880
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 2.6.32.10-90.fc12.i686 uhci_hcd
usb usb5: SerialNumber: 0000:00:1d.3
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
i8042.c: Detected active multiplexing controller, rev 1.1.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
cpuidle: using governor ladder
cpuidle: using governor menu
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
nf_conntrack version 0.5.0 (15890 buckets, 63560 max)
CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
ip_tables: (C) 2000-2006 Netfilter Core Team
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
Using IPI No-Shortcut mode
PM: Resume from disk failed.
registered taskstats version 1
No TPM chip found, activating TPM-bypass!
Magic number: 6:948:943
tty tty0: hash matches
tty console: hash matches
rtc_cmos 00:08: setting system clock to 2010-04-05 16:55:12 UTC (1270486512)
Initalizing network drop monitor service
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5
ata5.00: ATAPI: _NEC DVD_RW ND-6750A, 2.42, max UDMA/33
ata5.00: configured for UDMA/33
ata3: SATA link down (SStatus 0 SControl 300)
psmouse serio4: ID: 10 00 64
usb 4-1: new low speed USB device using uhci_hcd and address 2
usb 4-1: New USB device found, idVendor=046d, idProduct=c50e
usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 4-1: Product: USB RECEIVER
usb 4-1: Manufacturer: Logitech
usb 4-1: configuration #1 chosen from 1 choice
input: Logitech USB RECEIVER as /devices/pci0000:00/0000:00:1d.2/usb4/4-1/4-1:1.0/input/input6
generic-usb 0003:046D:C50E.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB RECEIVER] on usb-0000:00:1d.2-1/input0
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata1.00: ATA-7: ST98823AS, 3.04, max UDMA/133
ata1.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA ST98823AS 3.04 PQ: 0 ANSI: 5
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda:
scsi 4:0:0:0: CD-ROM _NEC DVD_RW ND-6750A 2.42 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 4:0:0:0: Attached scsi CD-ROM sr0
sr 4:0:0:0: Attached scsi generic sg1 type 5
input: PS/2 Logitech Wheel Mouse as /devices/platform/i8042/serio4/input/input7
sda1 sda2 sda3 sda4
sd 0:0:0:0: [sda] Attached SCSI disk
Freeing unused kernel memory: 548k freed
Write protecting the kernel text: 3676k
Write protecting the kernel read-only data: 1756k
dracut: dracut-004-4.fc12
udev: starting version 145
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input8
ACPI: Video Device [IGD] (multi-head: yes rom: no post: no)
[drm] Initialized drm 1.1.0 20060810
i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
i915 0000:00:02.0: setting latency timer to 64
[drm] set up 7M of stolen space
[drm] initialized overlay support
fbcon: inteldrmfb (fb0) is primary device
Console: switching to colour frame buffer device 160x50
fb0: inteldrmfb frame buffer device
registered panic notifier
[drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
dracut: Starting plymouth daemon
firewire_ohci 0000:06:04.0: enabling device (0195 -> 0197)
firewire_ohci 0000:06:04.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
firewire_ohci: Added fw-ohci device 0000:06:04.0, OHCI version 1.10
EXT4-fs (sda2): mounted filesystem with ordered data mode
firewire_core: created device fw0: GUID 00030d0050015703, S400
dracut: Mounted root filesystem /dev/sda2
dracut: Loading SELinux policy
type=1404 audit(1270486516.263:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
SELinux: 8192 avtab hash slots, 162634 rules.
SELinux: 8192 avtab hash slots, 162634 rules.
SELinux: 8 users, 12 roles, 3092 types, 152 bools, 1 sens, 1024 cats
SELinux: 77 classes, 162634 rules
SELinux: Completing initialization.
SELinux: Setting up existing superblocks.
SELinux: initialized (dev sda2, type ext4), uses xattr
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev securityfs, type securityfs), uses genfs_contexts
SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs
SELinux: initialized (dev devpts, type devpts), uses transition SIDs
SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
SELinux: initialized (dev devtmpfs, type devtmpfs), uses transition SIDs
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev proc, type proc), uses genfs_contexts
SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
type=1403 audit(1270486516.696:3): policy loaded auid=4294967295 ses=4294967295
dracut: Switching root
udev: starting version 145
cfg80211: Calling CRDA to update world regulatory domain
intel_rng: FWH not detected
i801_smbus 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19
ACPI: I/O resource 0000:00:1f.3 [0x18e0-0x18ff] conflicts with ACPI region SMBI [0x18e0-0x18ef]
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
iTCO_wdt: Found a ICH7-M or ICH7-U TCO device (Version=2, TCOBASE=0x1060)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
8139cp 0000:06:05.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too
8139too Fast Ethernet driver 0.9.28
8139too 0000:06:05.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
eth0: RealTek RTL8139 at 0xf8b20c00, 00:03:0d:49:2f:42, IRQ 16
iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.2.26kds
iwl3945: Copyright(c) 2003-2009 Intel Corporation
iwl3945 0000:05:00.0: enabling device (0000 -> 0002)
iwl3945 0000:05:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
iwl3945 0000:05:00.0: setting latency timer to 64
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
iwl3945 0000:05:00.0: Tunable channels: 13 802.11bg, 23 802.11a channels
iwl3945 0000:05:00.0: Detected Intel Wireless WiFi Link 3945ABG
iwl3945 0000:05:00.0: irq 28 for MSI/MSI-X
sdhci-pci 0000:06:04.2: SDHCI controller found [1217:7120] (rev 1)
sdhci-pci 0000:06:04.2: PCI INT A -> GSI 18 (level, low) -> IRQ 18
mmc0: Unknown controller version (16). You may experience problems.
Registered led device: mmc0::
mmc0: SDHCI controller on PCI [0000:06:04.2] using PIO
phy0: Selected rate control algorithm 'iwl-3945-rs'
HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
HDA Intel 0000:00:1b.0: setting latency timer to 64
cfg80211: Calling CRDA for country: RU
hda_codec: ALC861: BIOS auto-probing.
ALSA sound/pci/hda/hda_codec.c:3881: autoconfig: line_outs=1 (0xb/0x0/0x0/0x0/0x0)
ALSA sound/pci/hda/hda_codec.c:3885: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
ALSA sound/pci/hda/hda_codec.c:3889: hp_outs=0 (0x0/0x0/0x0/0x0/0x0)
ALSA sound/pci/hda/hda_codec.c:3890: mono: mono_out=0x0
ALSA sound/pci/hda/hda_codec.c:3893: dig-out=0x12/0x0
ALSA sound/pci/hda/hda_codec.c:3901: inputs: mic=0x10, fmic=0x0, line=0x0, fline=0x0, cd=0x11, aux=0x0
ALSA sound/pci/hda/patch_realtek.c:1284: realtek: No valid SSID, checking pincfg 0x00000000 for NID 0x1d
ALSA sound/pci/hda/patch_realtek.c:1364: realtek: Enable default setup for auto mode as fallback
input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input9
type=1400 audit(1270472122.230:4): avc: denied { mmap_zero } for pid=458 comm="vbetool" scontext=system_u:system_r:vbetool_t:s0-s0:c0.c1023 tcontext=system_u:system_r:vbetool_t:s0-s0:c0.c1023 tclass=memprotect
cfg80211: Regulatory domain changed to country: RU
    (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
    (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
fuse init (API version 7.13)
SELinux: initialized (dev sda4, type fuseblk), uses genfs_contexts
Adding 1054712k swap on /dev/sda3. Priority:-1 extents:1 across:1054712k
SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
microcode: CPU0 sig=0x6e8, pf=0x20, revision=0x39
platform microcode: firmware: requesting intel-ucode/06-0e-08
microcode: CPU1 sig=0x6e8, pf=0x20, revision=0x39
platform microcode: firmware: requesting intel-ucode/06-0e-08
Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
Microcode Update Driver: v2.00 removed.
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
ip6_tables: (C) 2000-2006 Netfilter Core Team
iwl3945 0000:05:00.0: firmware: requesting iwlwifi-3945-2.ucode
iwl3945 0000:05:00.0: loaded firmware version 15.32.2.9
Registered led device: iwl-phy0::radio
Registered led device: iwl-phy0::assoc
Registered led device: iwl-phy0::RX
Registered led device: iwl-phy0::TX
ADDRCONF(NETDEV_UP): wlan0: link is not ready
eth0: link down
ADDRCONF(NETDEV_UP): eth0: link is not ready
[drm:drm_mode_rmfb] *ERROR* tried to remove a fb that we didn't own
wlan0: deauthenticating from 00:18:f3:63:49:82 by local choice (reason=3)
wlan0: direct probe to AP 00:18:f3:63:49:82 (try 1)
wlan0: direct probe to AP 00:18:f3:63:49:82 (try 2)
wlan0: direct probe responded
wlan0: authenticate with AP 00:18:f3:63:49:82 (try 1)
wlan0: authenticated
wlan0: associate with AP 00:18:f3:63:49:82 (try 1)
wlan0: RX AssocResp from 00:18:f3:63:49:82 (capab=0x411 status=0 aid=1)
wlan0: associated
ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
padlock: VIA PadLock not detected.
wlan0: no IPv6 routers present[/more]

Добавлено:
Для старого ядра тот же кусок:


Цитата:

hda_codec: Unknown model for ALC861, trying auto-probe from BIOS...
ALSA sound/pci/hda/hda_codec.c:3862: autoconfig: line_outs=1 (0xb/0x0/0x0/0x0/0x0)
ALSA sound/pci/hda/hda_codec.c:3866: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
ALSA sound/pci/hda/hda_codec.c:3870: hp_outs=0 (0x0/0x0/0x0/0x0/0x0)
ALSA sound/pci/hda/hda_codec.c:3871: mono: mono_out=0x0
ALSA sound/pci/hda/hda_codec.c:3874: dig-out=0x12/0x0
ALSA sound/pci/hda/hda_codec.c:3882: inputs: mic=0x10, fmic=0x0, line=0x0, fline=0x0, cd=0x11, aux=0x0
ALSA sound/pci/hda/patch_realtek.c:1181: realtek: No valid SSID, checking pincfg 0x00000000 for NID 0x1d
ALSA sound/pci/hda/patch_realtek.c:1255: realtek: Enable default setup for auto mode as fallback

Добавлено:
[more=Вывод dmesg]Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.31.12-174.2.22.fc12.i686 (mockbuild@x86-04.phx2.fedoraproject.org) (gcc version 4.4.3 20100127 (Red Hat 4.4.3-4) (GCC) ) #1 SMP Fri Feb 19 19:26:06 UTC 2010
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
NSC Geode by NSC
Cyrix CyrixInstead
Centaur CentaurHauls
Transmeta GenuineTMx86
Transmeta TransmetaCPU
UMC UMC UMC UMC
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000dc000 - 00000000000e0000 (reserved)
BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000003f690000 (usable)
BIOS-e820: 000000003f690000 - 000000003f69d000 (ACPI data)
BIOS-e820: 000000003f69d000 - 000000003f700000 (ACPI NVS)
BIOS-e820: 000000003f700000 - 0000000040000000 (reserved)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
DMI present.
last_pfn = 0x3f690 max_arch_pfn = 0x100000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-CFFFF write-protect
D0000-DFFFF uncachable
E0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000 mask FC0000000 write-back
1 base 03F700000 mask FFFF00000 uncachable
2 base 03F800000 mask FFF800000 uncachable
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
PAT not supported by CPU.
original variable MTRRs
reg 0, base: 0GB, range: 1GB, type WB
reg 1, base: 1015MB, range: 1MB, type UC
reg 2, base: 1016MB, range: 8MB, type UC
total RAM coverred: 1015M
Found optimal setting for mtrr clean up
gran_size: 64K     chunk_size: 16M     num_reg: 3     lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 1GB, type WB
reg 1, base: 1015MB, range: 1MB, type UC
reg 2, base: 1016MB, range: 8MB, type UC
initial memory mapped : 0 - 01000000
init_memory_mapping: 0000000000000000-00000000373fe000
Using x86 segment limits to approximate NX protection
0000000000 - 0000400000 page 4k
0000400000 - 0037000000 page 2M
0037000000 - 00373fe000 page 4k
kernel direct mapping tables up to 373fe000 @ 7000-d000
RAMDISK: 37578000 - 37fef738
Allocated new RAMDISK: 00acd000 - 01544738
Move RAMDISK from 0000000037578000 - 0000000037fef737 to 00acd000 - 01544737
ACPI: RSDP 000f78b0 00014 (v00 MSTEST)
ACPI: RSDT 3f6978f6 00044 (v01 MSTEST Capell00 06040000 LTP 00000000)
ACPI: FACP 3f69ce20 00074 (v01 INTEL CALISTGA 06040000 LOHR 0000005A)
ACPI: DSDT 3f69852f 048F1 (v01 UW____ F34_____ 06040000 INTL 20050624)
ACPI: FACS 3f69dfc0 00040
ACPI: APIC 3f69ce94 00068 (v01 INTEL CALISTGA 06040000 LOHR 0000005A)
ACPI: HPET 3f69cefc 00038 (v01 INTEL CALISTGA 06040000 LOHR 0000005A)
ACPI: MCFG 3f69cf34 0003C (v01 INTEL CALISTGA 06040000 LOHR 0000005A)
ACPI: APIC 3f69cf70 00068 (v01 PTLTD      APIC 06040000 LTP 00000000)
ACPI: BOOT 3f69cfd8 00028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001)
ACPI: SSDT 3f698325 0020A (v01 SataRe SataAhci 00001000 INTL 20050624)
ACPI: SSDT 3f69793a 004F6 (v01 PmRef CpuPm 00003000 INTL 20050624)
ACPI: BIOS bug: multiple APIC/MADT found, using 0
ACPI: If "acpi_apic_instance=2" works better, notify linux-acpi@vger.kernel.org
ACPI: DMI BIOS year==0, assuming ACPI-capable machine
ACPI: Local APIC address 0xfee00000
130MB HIGHMEM available.
883MB LOWMEM available.
mapped low ram: 0 - 373fe000
low ram: 0 - 373fe000
node 0 low ram: 00000000 - 373fe000
node 0 bootmap 0000a000 - 00010e80
(9 early reservations) ==> bootmem [0000000000 - 00373fe000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
#2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
#3 [0000400000 - 0000ac7a30] TEXT DATA BSS ==> [0000400000 - 0000ac7a30]
#4 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000]
#5 [0000ac8000 - 0000acc114] BRK ==> [0000ac8000 - 0000acc114]
#6 [0000007000 - 000000a000] PGTABLE ==> [0000007000 - 000000a000]
#7 [0000acd000 - 0001544738] NEW RAMDISK ==> [0000acd000 - 0001544738]
#8 [000000a000 - 0000011000] BOOTMAP ==> [000000a000 - 0000011000]
found SMP MP-table at [c00f7960] f7960
Zone PFN ranges:
DMA 0x00000000 -> 0x00001000
Normal 0x00001000 -> 0x000373fe
HighMem 0x000373fe -> 0x0003f690
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
0: 0x00000000 -> 0x0000009f
0: 0x00000100 -> 0x0003f690
On node 0 totalpages: 259631
free_area_init_node: node 0, pgdat c097c3c0, node_mem_map c1545000
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 3967 pages, LIFO batch:0
Normal zone: 1736 pages used for memmap
Normal zone: 220470 pages, LIFO batch:31
HighMem zone: 262 pages used for memmap
HighMem zone: 33164 pages, LIFO batch:7
Using APIC driver default
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode: Flat. Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
SMP: Allowing 2 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 24
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000dc000
PM: Registered nosave memory: 00000000000dc000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 00000000000e4000
PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
Allocating PCI resources starting at 40000000 (gap: 40000000:a0000000)
NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:2 nr_node_ids:1
PERCPU: Embedded 14 pages at c1d3a000, static data 34428 bytes
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 257601
Kernel command line: ro root=UUID=48b0e876-5e1f-49ab-bb57-bb0f952e599e LANG=ru_RU.UTF-8 KEYBOARDTYPE=pc KEYTABLE=us rhgb quiet
PID hash table entries: 4096 (order: 12, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
allocated 5194560 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
Initializing HighMem for node 0 (000373fe:0003f690)
Memory: 1006344k/1038912k available (3504k kernel code, 31848k reserved, 2177k data, 436k init, 133704k highmem)
virtual kernel memory layout:
fixmap : 0xffad5000 - 0xfffff000 (5288 kB)
pkmap : 0xff400000 - 0xff800000 (4096 kB)
vmalloc : 0xf7bfe000 - 0xff3fe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf73fe000 ( 883 MB)
.init : 0xc098d000 - 0xc09fa000 ( 436 kB)
.data : 0xc076c1e7 - 0xc098c668 (2177 kB)
.text : 0xc0400000 - 0xc076c1e7 (3504 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Hierarchical RCU implementation.
NR_IRQS:1280
Fast TSC calibration using PIT
Detected 1600.029 MHz processor.
Console: colour VGA+ 80x25
console [tty0] enabled
hpet clockevent registered
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
Calibrating delay loop (skipped), value calculated using timer frequency.. 3200.05 BogoMIPS (lpj=1600029)
Security Framework initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
Mount-cache hash table entries: 512
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 2048K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
CPU0: Thermal monitoring enabled (TM2)
using mwait in idle threads.
Performance Counters: no PMU driver, software counters only.
Checking 'hlt' instruction... OK.
ACPI: Core revision 20090521
ftrace: converting mcount calls to 0f 1f 44 00 00
ftrace: allocating 20243 entries in 40 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Genuine Intel(R) CPU T2050 @ 1.60GHz stepping 08
Booting processor 1 APIC 0x1 ip 0x6000
Initializing CPU#1
Calibrating delay using timer specific routine.. 3199.96 BogoMIPS (lpj=1599982)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 2048K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
mce: CPU supports 6 MCE banks
CPU1: Thermal monitoring enabled (TM2)
CPU1: Genuine Intel(R) CPU T2050 @ 1.60GHz stepping 08
checking TSC synchronization [CPU#0 -> CPU#1]: passed.
Brought up 2 CPUs
Total of 2 processors activated (6400.02 BogoMIPS).
sizeof(vma)=84 bytes
sizeof(page)=32 bytes
sizeof(inode)=352 bytes
sizeof(dentry)=132 bytes
sizeof(ext3inode)=500 bytes
sizeof(buffer_head)=56 bytes
sizeof(skbuff)=192 bytes
sizeof(task_struct)=3256 bytes
CPU0 attaching sched-domain:
domain 0: span 0-1 level MC
groups: 0 1
CPU1 attaching sched-domain:
domain 0: span 0-1 level MC
groups: 1 0
Booting paravirtualized kernel on bare hardware
regulator: core version 0.5
Time: 17:09:29 Date: 04/05/10
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
PCI: MCFG area at e0000000 reserved in E820
PCI: Using MMCONFIG for extended config space
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: BIOS _OSI(Linux) query ignored
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: EC: GPE = 0x19, I/O: command/status = 0x66, data = 0x62
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:02.0: reg 10 32bit mmio: [0xb0080000-0xb00fffff]
pci 0000:00:02.0: reg 14 io port: [0x1800-0x1807]
pci 0000:00:02.0: reg 18 32bit mmio: [0xc0000000-0xcfffffff]
pci 0000:00:02.0: reg 1c 32bit mmio: [0xb0040000-0xb007ffff]
pci 0000:00:02.1: reg 10 32bit mmio: [0xb0100000-0xb017ffff]
pci 0000:00:1b.0: reg 10 64bit mmio: [0xf0000000-0xf0003fff]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: PME# disabled
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: PME# disabled
pci 0000:00:1d.0: reg 20 io port: [0x1820-0x183f]
pci 0000:00:1d.1: reg 20 io port: [0x1840-0x185f]
pci 0000:00:1d.2: reg 20 io port: [0x1860-0x187f]
pci 0000:00:1d.3: reg 20 io port: [0x1880-0x189f]
pci 0000:00:1d.7: reg 10 32bit mmio: [0xf0004000-0xf00043ff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH6 GPIO
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0068 (mask 0007)
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0200 (mask 000f)
pci 0000:00:1f.1: reg 10 io port: [0x00-0x07]
pci 0000:00:1f.1: reg 14 io port: [0x00-0x03]
pci 0000:00:1f.1: reg 18 io port: [0x00-0x07]
pci 0000:00:1f.1: reg 1c io port: [0x00-0x03]
pci 0000:00:1f.1: reg 20 io port: [0x1810-0x181f]
pci 0000:00:1f.2: reg 10 io port: [0x18d0-0x18d7]
pci 0000:00:1f.2: reg 14 io port: [0x18c4-0x18c7]
pci 0000:00:1f.2: reg 18 io port: [0x18c8-0x18cf]
pci 0000:00:1f.2: reg 1c io port: [0x18c0-0x18c3]
pci 0000:00:1f.2: reg 20 io port: [0x18b0-0x18bf]
pci 0000:00:1f.2: reg 24 32bit mmio: [0xf0004400-0xf00047ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
pci 0000:00:1f.3: reg 20 io port: [0x18e0-0x18ff]
pci 0000:00:1c.0: bridge io port: [0xf000-0xffff]
pci 0000:00:1c.0: bridge 32bit mmio: [0xfac00000-0xfebfffff]
pci 0000:05:00.0: reg 10 32bit mmio: [0xb0200000-0xb0200fff]
pci 0000:05:00.0: PME# supported from D0 D3hot D3cold
pci 0000:05:00.0: PME# disabled
pci 0000:05:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:00:1c.2: bridge 32bit mmio: [0xf7000000-0xf70fffff]
pci 0000:06:04.0: reg 10 32bit mmio: [0x000000-0x000fff]
pci 0000:06:04.0: reg 14 32bit mmio: [0xb0300000-0xb03007ff]
pci 0000:06:04.0: supports D1 D2
pci 0000:06:04.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:06:04.0: PME# disabled
pci 0000:06:04.2: reg 10 32bit mmio: [0xb0300800-0xb03008ff]
pci 0000:06:04.2: supports D1 D2
pci 0000:06:04.2: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:06:04.2: PME# disabled
pci 0000:06:04.3: reg 10 32bit mmio: [0xf0202000-0xf0202fff]
pci 0000:06:04.3: supports D1 D2
pci 0000:06:04.3: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:06:04.3: PME# disabled
pci 0000:06:05.0: reg 10 io port: [0x2000-0x20ff]
pci 0000:06:05.0: reg 14 32bit mmio: [0xb0300c00-0xb0300cff]
pci 0000:06:05.0: supports D1 D2
pci 0000:06:05.0: PME# supported from D1 D2 D3hot D3cold
pci 0000:06:05.0: PME# disabled
pci 0000:00:1e.0: transparent bridge
pci 0000:00:1e.0: bridge io port: [0x2000-0x2fff]
pci 0000:00:1e.0: bridge 32bit mmio: [0xf0200000-0xf02fffff]
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 1 *3 4 5 6 7 10 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 *7 10 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 *5 6 7 11 12 14 15)
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: old code would have set cacheline size to 32 bytes, but clflush_size = 64
PCI: pci_cache_line_size set to 64 bytes
pci 0000:05:00.0: BAR 0: no parent found for of device [0xb0200000-0xb0200fff]
pci 0000:05:00.0: BAR 0: can't allocate resource
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 64-bit 14.318180 MHz counter
Switched to high resolution mode on CPU 0
Switched to high resolution mode on CPU 1
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 11 devices
ACPI: ACPI bus type pnp unregistered
system 00:01: iomem range 0xe0000000-0xefffffff has been reserved
system 00:01: iomem range 0xfed14000-0xfed17fff has been reserved
system 00:01: iomem range 0xfed18000-0xfed18fff has been reserved
system 00:01: iomem range 0xfed19000-0xfed19fff has been reserved
system 00:01: iomem range 0xfed1c000-0xfed1ffff has been reserved
system 00:01: iomem range 0xfed20000-0xfed3ffff has been reserved
system 00:01: iomem range 0xfed40000-0xfed44fff has been reserved
system 00:01: iomem range 0xfed45000-0xfed8ffff has been reserved
system 00:04: iomem range 0xfed00000-0xfed003ff has been reserved
system 00:06: ioport range 0x200-0x20f has been reserved
system 00:06: ioport range 0x680-0x69f has been reserved
system 00:06: ioport range 0x800-0x80f has been reserved
system 00:06: ioport range 0x1000-0x107f has been reserved
system 00:06: ioport range 0x1180-0x11bf has been reserved
system 00:06: ioport range 0x1640-0x164f has been reserved
system 00:07: ioport range 0x6a0-0x6af has been reserved
system 00:07: ioport range 0x6b0-0x6ff has been reserved
pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
pci 0000:00:1c.0: IO window: 0xf000-0xffff
pci 0000:00:1c.0: MEM window: 0xfac00000-0xfebfffff
pci 0000:00:1c.0: PREFETCH window: disabled
pci 0000:00:1c.1: PCI bridge, secondary bus 0000:04
pci 0000:00:1c.1: IO window: disabled
pci 0000:00:1c.1: MEM window: disabled
pci 0000:00:1c.1: PREFETCH window: disabled
pci 0000:00:1c.2: PCI bridge, secondary bus 0000:05
pci 0000:00:1c.2: IO window: disabled
pci 0000:00:1c.2: MEM window: 0xf7000000-0xf70fffff
pci 0000:00:1c.2: PREFETCH window: disabled
pci 0000:00:1e.0: PCI bridge, secondary bus 0000:06
pci 0000:00:1e.0: IO window: 0x2000-0x2fff
pci 0000:00:1e.0: MEM window: 0xf0200000-0xf02fffff
pci 0000:00:1e.0: PREFETCH window: disabled
pci 0000:00:1c.0: enabling device (0000 -> 0003)
pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.1: setting latency timer to 64
pci 0000:00:1c.2: enabling device (0000 -> 0002)
pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:1c.2: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 0 io: [0x00-0xffff]
pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
pci_bus 0000:02: resource 0 io: [0xf000-0xffff]
pci_bus 0000:02: resource 1 mem: [0xfac00000-0xfebfffff]
pci_bus 0000:05: resource 1 mem: [0xf7000000-0xf70fffff]
pci_bus 0000:06: resource 0 io: [0x2000-0x2fff]
pci_bus 0000:06: resource 1 mem: [0xf0200000-0xf02fffff]
pci_bus 0000:06: resource 3 io: [0x00-0xffff]
pci_bus 0000:06: resource 4 mem: [0x000000-0xffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
NET: Registered protocol family 1
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 10717k freed
Simple Boot Flag at 0x36 set to 0x1
apm: BIOS not found.
audit: initializing netlink socket (disabled)
type=2000 audit(1270487386.565:1): initialized
highmem bounce pool size: 64 pages
HugeTLB registered 4 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
msgmni has been set to 1725
SELinux: Registering netfilter hooks
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci 0000:00:02.0: Boot video device
pcieport-driver 0000:00:1c.0: irq 24 for MSI/MSI-X
pcieport-driver 0000:00:1c.0: setting latency timer to 64
pcieport-driver 0000:00:1c.1: irq 25 for MSI/MSI-X
pcieport-driver 0000:00:1c.1: setting latency timer to 64
pcieport-driver 0000:00:1c.2: irq 26 for MSI/MSI-X
pcieport-driver 0000:00:1c.2: setting latency timer to 64
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
ACPI: AC Adapter [AC0] (on-line)
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
ACPI: Power Button [PWRF]
input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
ACPI: Lid Switch [LID0]
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
ACPI: Power Button [PWRB]
input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3
ACPI: Sleep Button [SLPB]
ACPI: SSDT 3f69807b 00221 (v01 PmRef Cpu0Ist 00003000 INTL 20050624)
ACPI: SSDT 3f697e30 001C6 (v01 PmRef Cpu0Cst 00003001 INTL 20050624)
Marking TSC unstable due to TSC halts in idle
ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
processor LNXCPU:00: registered as cooling_device0
ACPI: Processor [CPU0] (supports 8 throttling states)
ACPI: SSDT 3f69829c 00089 (v01 PmRef Cpu1Ist 00003000 INTL 20050624)
ACPI: SSDT 3f697ff6 00085 (v01 PmRef Cpu1Cst 00003000 INTL 20050624)
ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
processor LNXCPU:01: registered as cooling_device1
ACPI: Processor [CPU1] (supports 8 throttling states)
thermal LNXTHERM:01: registered as thermal_zone0
ACPI: Thermal Zone [THRM] (59 C)
isapnp: Scanning for PnP cards...
ACPI: Battery Slot [BAT0] (battery present)
isapnp: No Plug & Play device found
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
agpgart-intel 0000:00:00.0: Intel 945GM Chipset
agpgart-intel 0000:00:00.0: detected 7932K stolen memory
agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xc0000000
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
brd: module loaded
loop: module loaded
input: Macintosh mouse button emulation as /devices/virtual/input/input4
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
ahci 0000:00:1f.2: irq 27 for MSI/MSI-X
ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 1.5 Gbps 0x5 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part
ahci 0000:00:1f.2: setting latency timer to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
ata1: SATA max UDMA/133 abar m1024@0xf0004400 port 0xf0004500 irq 27
ata2: DUMMY
ata3: SATA max UDMA/133 abar m1024@0xf0004400 port 0xf0004600 irq 27
ata4: DUMMY
ata_piix 0000:00:1f.1: version 2.13
ata_piix 0000:00:1f.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
ata_piix 0000:00:1f.1: setting latency timer to 64
scsi4 : ata_piix
scsi5 : ata_piix
ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1810 irq 14
ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1818 irq 15
Fixed MDIO Bus: probed
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ata6: port disabled. ignoring.
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1d.7: using broken periodic workaround
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf0004000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.31.12-174.2.22.fc12.i686 ehci_hcd
usb usb1: SerialNumber: 0000:00:1d.7
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001820
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: UHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.31.12-174.2.22.fc12.i686 uhci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001840
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.31.12-174.2.22.fc12.i686 uhci_hcd
usb usb3: SerialNumber: 0000:00:1d.1
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001860
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.31.12-174.2.22.fc12.i686 uhci_hcd
usb usb4: SerialNumber: 0000:00:1d.2
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1d.3: setting latency timer to 64
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.3: irq 16, io base 0x00001880
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 2.6.31.12-174.2.22.fc12.i686 uhci_hcd
usb usb5: SerialNumber: 0000:00:1d.3
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
i8042.c: Detected active multiplexing controller, rev 1.1.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
cpuidle: using governor ladder
cpuidle: using governor menu
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
nf_conntrack version 0.5.0 (16233 buckets, 64932 max)
CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
ip_tables: (C) 2000-2006 Netfilter Core Team
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
Using IPI No-Shortcut mode
PM: Resume from disk failed.
registered taskstats version 1
No TPM chip found, activating TPM-bypass!
Magic number: 6:780:187
rtc_cmos 00:08: setting system clock to 2010-04-05 17:09:47 UTC (1270487387)
Initalizing network drop monitor service
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5
ata5.00: ATAPI: _NEC DVD_RW ND-6750A, 2.42, max UDMA/33
ata5.00: configured for UDMA/33
ata3: SATA link down (SStatus 0 SControl 300)
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
ata1.00: ATA-7: ST98823AS, 3.04, max UDMA/133
ata1.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA ST98823AS 3.04 PQ: 0 ANSI: 5
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda:
scsi 4:0:0:0: CD-ROM _NEC DVD_RW ND-6750A 2.42 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 4:0:0:0: Attached scsi CD-ROM sr0
sr 4:0:0:0: Attached scsi generic sg1 type 5
psmouse serio4: ID: 10 00 64
usb 4-1: new low speed USB device using uhci_hcd and address 2
Clocksource tsc unstable (delta = -155535208 ns)
sda1 sda2 sda3 sda4
sd 0:0:0:0: [sda] Attached SCSI disk
Freeing unused kernel memory: 436k freed
Write protecting the kernel text: 3508k
Write protecting the kernel read-only data: 1696k
dracut: dracut-004-4.fc12
udev: starting version 145
input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:07/input/input6
ACPI: Video Device [IGD] (multi-head: yes rom: no post: no)
usb 4-1: New USB device found, idVendor=046d, idProduct=c50e
usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 4-1: Product: USB RECEIVER
usb 4-1: Manufacturer: Logitech
usb 4-1: configuration #1 chosen from 1 choice
[drm] Initialized drm 1.1.0 20060810
input: Logitech USB RECEIVER as /devices/pci0000:00/0000:00:1d.2/usb4/4-1/4-1:1.0/input/input7
generic-usb 0003:046D:C50E.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB RECEIVER] on usb-0000:00:1d.2-1/input0
i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
i915 0000:00:02.0: setting latency timer to 64
input: PS/2 Logitech Wheel Mouse as /devices/platform/i8042/serio4/input/input8
[drm] TV-14: set mode NTSC 480i 0
fbcon: inteldrmfb (fb0) is primary device
[drm] LVDS-8: set mode 1280x800 1d
Console: switching to colour frame buffer device 160x50
fb0: inteldrmfb frame buffer device
registered panic notifier
[drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
dracut: Starting plymouth daemon
[drm] TV-14: set mode NTSC 480i 0
[drm] TV-14: set mode NTSC 480i 0
firewire_ohci 0000:06:04.0: enabling device (0195 -> 0197)
firewire_ohci 0000:06:04.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
firewire_ohci: Added fw-ohci device 0000:06:04.0, OHCI version 1.10
firewire_core: created device fw0: GUID 00030d0050015703, S400
EXT4-fs (sda2): barriers enabled
kjournald2 starting: pid 224, dev sda2:8, commit interval 5 seconds
EXT4-fs (sda2): delayed allocation enabled
EXT4-fs: file extents enabled
EXT4-fs: mballoc enabled
EXT4-fs (sda2): mounted filesystem with ordered data mode
dracut: Mounted root filesystem /dev/sda2
dracut: Loading SELinux policy
type=1404 audit(1270487391.063:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
SELinux: 8192 avtab hash slots, 162634 rules.
SELinux: 8192 avtab hash slots, 162634 rules.
SELinux: 8 users, 12 roles, 3092 types, 152 bools, 1 sens, 1024 cats
SELinux: 77 classes, 162634 rules
SELinux: Completing initialization.
SELinux: Setting up existing superblocks.
SELinux: initialized (dev sda2, type ext4), uses xattr
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev securityfs, type securityfs), uses genfs_contexts
SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs
SELinux: initialized (dev devpts, type devpts), uses transition SIDs
SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
SELinux: initialized (dev proc, type proc), uses genfs_contexts
SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
type=1403 audit(1270487391.480:3): policy loaded auid=4294967295 ses=4294967295
dracut: Switching root
udev: starting version 145
intel_rng: FWH not detected
<6>8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
8139cp 0000:06:05.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too
cfg80211: Calling CRDA to update world regulatory domain
iTCO_vendor_support: vendor-support=0
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
i801_smbus 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19
ACPI: I/O resource 0000:00:1f.3 [0x18e0-0x18ff] conflicts with ACPI region SMBI [0x18e0-0x18ef]
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
sdhci-pci 0000:06:04.2: SDHCI controller found [1217:7120] (rev 1)
sdhci-pci 0000:06:04.2: PCI INT A -> GSI 18 (level, low) -> IRQ 18
mmc0: Unknown controller version (16). You may experience problems.
Registered led device: mmc0::
mmc0: SDHCI controller on PCI [0000:06:04.2] using PIO
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
iTCO_wdt: Found a ICH7-M or ICH7-U TCO device (Version=2, TCOBASE=0x1060)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
8139too Fast Ethernet driver 0.9.28
8139too 0000:06:05.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
eth0: RealTek RTL8139 at 0xf8afac00, 00:03:0d:49:2f:42, IRQ 16
type=1400 audit(1270472996.476:4): avc: denied { mmap_zero } for pid=319 comm="vbetool" scontext=system_u:system_r:vbetool_t:s0-s0:c0.c1023 tcontext=system_u:system_r:vbetool_t:s0-s0:c0.c1023 tclass=memprotect
iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.2.26kds
iwl3945: Copyright(c) 2003-2009 Intel Corporation
iwl3945 0000:05:00.0: enabling device (0000 -> 0002)
iwl3945 0000:05:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
iwl3945 0000:05:00.0: setting latency timer to 64
iwl3945 0000:05:00.0: Tunable channels: 13 802.11bg, 23 802.11a channels
iwl3945 0000:05:00.0: Detected Intel Wireless WiFi Link 3945ABG
iwl3945 0000:05:00.0: irq 28 for MSI/MSI-X
cfg80211: World regulatory domain updated:
    (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
    (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
    (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
    (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
    (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
    (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
HDA Intel 0000:00:1b.0: setting latency timer to 64
phy0: Selected rate control algorithm 'iwl-3945-rs'
hda_codec: Unknown model for ALC861, trying auto-probe from BIOS...
ALSA sound/pci/hda/hda_codec.c:3862: autoconfig: line_outs=1 (0xb/0x0/0x0/0x0/0x0)
ALSA sound/pci/hda/hda_codec.c:3866: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
ALSA sound/pci/hda/hda_codec.c:3870: hp_outs=0 (0x0/0x0/0x0/0x0/0x0)
ALSA sound/pci/hda/hda_codec.c:3871: mono: mono_out=0x0
ALSA sound/pci/hda/hda_codec.c:3874: dig-out=0x12/0x0
ALSA sound/pci/hda/hda_codec.c:3882: inputs: mic=0x10, fmic=0x0, line=0x0, fline=0x0, cd=0x11, aux=0x0
ALSA sound/pci/hda/patch_realtek.c:1181: realtek: No valid SSID, checking pincfg 0x00000000 for NID 0x1d
ALSA sound/pci/hda/patch_realtek.c:1255: realtek: Enable default setup for auto mode as fallback
input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input9
cfg80211: Calling CRDA for country: RU
cfg80211: Regulatory domain changed to country: RU
    (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
    (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
EXT4-fs (sda2): internal journal on sda2:8
fuse init (API version 7.12)
SELinux: initialized (dev sda4, type fuseblk), uses genfs_contexts
Adding 1054712k swap on /dev/sda3. Priority:-1 extents:1 across:1054712k
SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
microcode: CPU0 sig=0x6e8, pf=0x20, revision=0x39
platform microcode: firmware: requesting intel-ucode/06-0e-08
microcode: CPU1 sig=0x6e8, pf=0x20, revision=0x39
platform microcode: firmware: requesting intel-ucode/06-0e-08
Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
Microcode Update Driver: v2.00 removed.
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
ip6_tables: (C) 2000-2006 Netfilter Core Team
iwl3945 0000:05:00.0: firmware: requesting iwlwifi-3945-2.ucode
iwl3945 0000:05:00.0: loaded firmware version 15.32.2.9
Registered led device: iwl-phy0::radio
Registered led device: iwl-phy0::assoc
Registered led device: iwl-phy0::RX
Registered led device: iwl-phy0::TX
ADDRCONF(NETDEV_UP): wlan0: link is not ready
eth0: link down
ADDRCONF(NETDEV_UP): eth0: link is not ready
[drm:drm_mode_rmfb] *ERROR* tried to remove a fb that we didn't own
[drm] TV-14: set mode NTSC 480i 0
[drm] TV-14: set mode NTSC 480i 0
[drm] TV-14: set mode NTSC 480i 0
[drm] TV-14: set mode NTSC 480i 0
[drm] TV-14: set mode NTSC 480i 0
[drm] TV-14: set mode NTSC 480i 0
[drm] TV-14: set mode NTSC 480i 0
[drm] TV-14: set mode NTSC 480i 0
[drm] TV-14: set mode NTSC 480i 0
[drm] TV-14: set mode NTSC 480i 0
[drm] TV-14: set mode NTSC 480i 0
[drm] TV-14: set mode NTSC 480i 0
[drm] TV-14: set mode NTSC 480i 0
[drm] TV-14: set mode NTSC 480i 0
[drm] TV-14: set mode NTSC 480i 0
[drm] TV-14: set mode NTSC 480i 0
[drm] TV-14: set mode NTSC 480i 0
[drm] TV-14: set mode NTSC 480i 0
[drm] TV-14: set mode NTSC 480i 0
[drm] TV-14: set mode NTSC 480i 0
wlan0: authenticate with AP 00:18:f3:63:49:82
wlan0: authenticated
wlan0: associate with AP 00:18:f3:63:49:82
wlan0: RX AssocResp from 00:18:f3:63:49:82 (capab=0x411 status=0 aid=1)
wlan0: associated
ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
padlock: VIA PadLock not detected.
wlan0: no IPv6 routers present
CE: hpet increasing min_delta_ns to 15000 nsec[/more]

Пожалуй, все-таки это оффтопик для темы по Arch Linux; может, перейти в какую-нибудь другую или даже вынести в отдельную?

Добавлено:
Кстати, на федоре даже удобнее диагностировать: можно грузить работающий и неработающий вариант (разные ядра, как легко заметить) и наблюдать разницу.

Думаю, да, можно создать более общую тему (не привязывать к Arch), знающих людей может появиться больше. Сам же вряд ли смогу помочь, знаний пока не так много. Полгода просидел на Кубунте, сейчас думаю перейти на Арч.

Скажу, что один мой знакомый решал похожую проблему запрещением загрузки модуля именно в initrd. Не знаю, как это может помочь. Можно, как вы уже говорили, попробовать собрать 2.6.31 ядро. Вот официальная дока:

http://wiki.archlinux.org/index.php/Kernel_Compilation_From_Source

Или, допустим, можно установиться с одного из последних дисков, где еще 31 ядро идет и запретить его обновление. Не знаю, стоит ли игра свеч

Jokerjar79

Цитата:

Думаю, да, можно создать более общую тему (не привязывать к Arch), знающих людей может появиться больше.

Скорее писать в багзиллу или искать лучше. Уж очень тянет именно на глюк ядра, причем упоминания аналогичных встречались.


Цитата:

Скажу, что один мой знакомый решал похожую проблему запрещением загрузки модуля именно в initrd.

Хм... Насколько я понимаю, весь смысл initrd в том, чтобы модули ядра для какого-нибудь хитрого SATA или RAID доставить, иначе замкнутый круг: модули на диске, и чтобы их прочесть, нужны эти же самые модули. При чем тут ALSA-то? Или о чем речь?


Цитата:

Можно, как вы уже говорили, попробовать собрать 2.6.31 ядро. Вот официальная дока:

http://wiki.archlinux.org/index.php/Kernel_Compilation_From_Source

Так я же вроде вполне однозначно написал, что собрал ядро 2.6.31.12 с kernel.org. Вручную, классическим методом. Безо всякого initrd, кстати, вообще, потому что почти монолитное. Была у меня, кстати, идея, что в этом и загвоздка - загрузочные скрипты Arch такого не воспринимают, им обязательно initrd подавай, но это, вообще говоря, ерунда полная.


Цитата:

Или, допустим, можно установиться с одного из последних дисков, где еще 31 ядро идет и запретить его обновление.

Оно вроде достаточно давно уже 32, нет? Я, кстати, искал во всяких репозиториях, где, бывает, можно найти предыдущие версии пакетов, но увы, не для ядра. Ну и потом: с фирменным kernel26-lts загрузиться в графическом режиме мне также не удалось, хотя тут-то ладно, оно все-таки на стоящий где-то в углу сервер рассчитано.


Цитата:

Не знаю, стоит ли игра свеч

Правильная постановка вопроса, между прочим.


Цитата:

Полгода просидел на Кубунте, сейчас думаю перейти на Арч.

Коли не секрет, а какие мотивы перехода? Попробовать что-то новое, или же в Kubuntu что-то замучало, какие-нибудь там тормоза или глюки?

Цитата:

Так я же вроде вполне однозначно написал, что собрал ядро 2.6.31.12 с kernel.org

Ну, может, без инструкций )


Цитата:

Оно вроде достаточно давно уже 32, нет?

Вроде, не очень давно (в пределах полугода, могу ошибаться)


Цитата:

Коли не секрет, а какие мотивы перехода? Попробовать что-то новое, или же в Kubuntu что-то замучало, какие-нибудь там тормоза или глюки?

Нет, всё было хорошо. Именно Кубунту меня притянула к Линуксу и, в частности к КДЕ. А на Арч хочу, т.к. он мне очень понравился в плане устройства, его технической простотой. В Кубунту хоть все и работает как надо, но не понимаешь как, т.к. все за тебя понапичкано и обработанно напильником. Хочется разобраться самому. Посижу, поразбираюсь. Дальше видно будет

Jokerjar79

Цитата:

Ну, может, без инструкций )

А что инструкции? Ссылку ту я видел, но она скорее полезна, если нужно самому пакет изготовить, а вообще, make menuconfig, потом make, make install и make modules_install никто не отменял.