[more] решил поставить драйвер для DOS 6.22 чтобы видеть диски ntfs. Скачал такой - ntfs4dos (Paragon DOS IFS driver. Copyright (C) Paragon 2003-2008.) При запуске команды: ND 4096 -LFN -MOUNTALL выходит следующее:
Loading Paragon Engine
Please wait...
Memory allocation error
Cannot load COMMAND, system halted
система виснет... что может быть?
----------------------------------------------------
вот файл описания:
Paragon DOS IFS driver.
Copyright (C) Paragon 2003-2008.
Paragon IFS driver allows user to access non-DOS file systems under DOS.
This version supports NTFS, Ext2FS, Ext3FS and hidden FAT/FAT32.
1. System requirements.
- Intel 386+ CPU on your PC;
- 4Mb RAM or more;
- MS-compatible DOS version 5.00+;
- XMS driver version 2+ - you need it to run other DPMI programs with DOS
IFS driver.
2. Installation and setup.
Copy all the files to the same directory. It's useful to include this
directory into your "PATH" environment settings.
3. Resident driver loading.
Run file ND.BAT:
ND <maximum XMS memory size in KBytes> [-LFN] [-MOUNTALL] [-NDEB]
[-CP:<code page number>]
The 1st parameter specifies extended memory to reserve for resident driver
(4096 - 4Mb seems to be enough).
The 2d parameter enables WIN long file name support. If you use this driver
in Win DOS prompt, some DOS commands so as DIR, COPY, DEL, MD, RD, REN can
show long file names and access the files by them.
The 3d parameter is used to mount all the partitions with file systems
supported by current version of driver.
The 4th parameter is used to run driver in debug mode with typing FS
error messages on the screen. Use this option if you have some troubles
with our program. Copy error messages accurately from the screen and mail
our support service.
The 5th parameter is used to support national file names. For each codepage
supported ".\NLS\" subdirectory of the IFS driver directory contains 2 files:
<number>.CPI - ASCII <=> Unicode convert table;
<number>.UCT - upper case convert table.
If you want to run other DPMI programs you should install HIMEM in your
CONFIG.SYS.
Don't run ND.BAT under Norton Commander!!!
(Run Norton after if you need it.)
4. Mounting the partitions.
You can use -MOUNTALL option of ND.BAT to mount all the accessible
partitions. Another way of mount/unmount the partitions is using
Paragon DOS PM Lite included in your complete install package.
5. IFS driver unloading.
Run file ND.BAT:
ND -C
This command dismounts all IFS mounted partitions and unloads resident
driver. "Access denied!" error message means that driver is not unloaded
because there are some open files on IFS mounted partitions or some interrupt
vectors used by IFS are hooked by another applications.
6. Found problems.
If you use DOS IFS driver with PTS DOS, don't set the option "DOS=HIGH" in
the CONFIG.SYS file - it causes DOS hung.
[/more]
Loading Paragon Engine
Please wait...
Memory allocation error
Cannot load COMMAND, system halted
система виснет... что может быть?
----------------------------------------------------
вот файл описания:
Paragon DOS IFS driver.
Copyright (C) Paragon 2003-2008.
Paragon IFS driver allows user to access non-DOS file systems under DOS.
This version supports NTFS, Ext2FS, Ext3FS and hidden FAT/FAT32.
1. System requirements.
- Intel 386+ CPU on your PC;
- 4Mb RAM or more;
- MS-compatible DOS version 5.00+;
- XMS driver version 2+ - you need it to run other DPMI programs with DOS
IFS driver.
2. Installation and setup.
Copy all the files to the same directory. It's useful to include this
directory into your "PATH" environment settings.
3. Resident driver loading.
Run file ND.BAT:
ND <maximum XMS memory size in KBytes> [-LFN] [-MOUNTALL] [-NDEB]
[-CP:<code page number>]
The 1st parameter specifies extended memory to reserve for resident driver
(4096 - 4Mb seems to be enough).
The 2d parameter enables WIN long file name support. If you use this driver
in Win DOS prompt, some DOS commands so as DIR, COPY, DEL, MD, RD, REN can
show long file names and access the files by them.
The 3d parameter is used to mount all the partitions with file systems
supported by current version of driver.
The 4th parameter is used to run driver in debug mode with typing FS
error messages on the screen. Use this option if you have some troubles
with our program. Copy error messages accurately from the screen and mail
our support service.
The 5th parameter is used to support national file names. For each codepage
supported ".\NLS\" subdirectory of the IFS driver directory contains 2 files:
<number>.CPI - ASCII <=> Unicode convert table;
<number>.UCT - upper case convert table.
If you want to run other DPMI programs you should install HIMEM in your
CONFIG.SYS.
Don't run ND.BAT under Norton Commander!!!
(Run Norton after if you need it.)
4. Mounting the partitions.
You can use -MOUNTALL option of ND.BAT to mount all the accessible
partitions. Another way of mount/unmount the partitions is using
Paragon DOS PM Lite included in your complete install package.
5. IFS driver unloading.
Run file ND.BAT:
ND -C
This command dismounts all IFS mounted partitions and unloads resident
driver. "Access denied!" error message means that driver is not unloaded
because there are some open files on IFS mounted partitions or some interrupt
vectors used by IFS are hooked by another applications.
6. Found problems.
If you use DOS IFS driver with PTS DOS, don't set the option "DOS=HIGH" in
the CONFIG.SYS file - it causes DOS hung.
[/more]