» PassMark BurnInTest

Corrected a bug where the frames in the 3D test would not change after about 16.8 million frames, hence the same frame was rendered and displayed (appearing not to update).
Temperature monitoring support added for more hard disk types.

Version 6.0 build 1025, 12/August/2010

- Corrected a crash bug with the standard Network test that occurred on some systems when Test all available Network Adapters was selected.
- Changed the startup of BurnInTest to allow BurnInTest to start when a specific 3rd party USB device (incompatible with BurnInTest) was connected to the system.
- System information has been updated for newer AMD and Intel CPU specifications.
- Corrected the CPU multiplier and base clock for the AMD Phenom II X6 when the CPU did not go into the - Turbo Core P-State during the CPU frequency measurement.
- Update to the CPU detection when BurnInTest is started without access to all CPUs i.e. started with a CPU affinity mask.
- Forced debug logging ("-u") improved. SMBIOS system information, standard network test and serial port test debug logging has been increased.
- Minor help file updates.
- Improvements to the CPU frequency measurement on startup.
- Improvements to the raw disk test (physical disk number test) to avoid sharing violation errors during the random seek cycle. Also, the raw disk test can now be configured with 32-bit BurnInTest, when running on 64-bit Windows.
- Improvements to the Sound Loopback test when the CPU is under load. Corrected an "Out of Memory" error for the Sound loopback test. Improved the Sound Loopback test window display.
- Change for Turbo capable CPU's when run under WinPE 3.0 to correct a system crash.
- When running on WinPE, F10 now launches the Windows command window.

Version 6.0 build 1027, 12/January/2011
- System information Graphic card naming updates.
- Corrected the reporting of the CPU speed measurements for overclocked Intel Core 2 CPU's.
- VIA CPU model names now reported.
- Corrected a crash on startup for a particular system.

Version 6.0 build 1028, 19/January/2011
- Improved system information for Intel 2nd generation i3, i5 and i7 CPU's (Sandy Bridge).

Version 6.0 build 1029, 4/April/2011

- Some CPU speed information is now not collected when the command line parameter '-W' (minimize system information collection) is used. Some systems, e.g. a customer's Windows Embedded Standard system, explicitly flags support of the mechanism used, but doesn't support it. This leads to a BSOD on startup (STOP: 0x0000008E (0xC0000005, ...) intelppm.sys).
- Corrected a crash on startup for a particular system (related to the collection of SMBIOS system information).
- Corrected a crash in Preferences->Sound when a non existent file name is manually entered.
- An explicit 1.5GB limit on the amount of video memory that 32-bit BurnInTest will test has been added. This is due to limitations with the default configuration of 32-bit Windows. On 64-bit systems, 64-bit BurnInTest should be used where this limit does not exist for BurnInTest and other applications.
- Added a new video playback error for CPU usage exceeded for audio playback when certain sound effects are enabled. Added additional details for a set of audio events during video playback.
- Improved the detection of the number of CPU cores when the "CPUID limit" BIOS setting is enabled (not the normal setting).
- Corrected a minor resource (handle) leak with the Optical drive test when non-PassMark optical media is used and the test detects and reports errors. This could potentially cause system problems during the test if a very large number of Optical drive errors are found.

Version 6.0 build 1030, 2/May/2011

- Corrected the "-K" command line parameter (keep disk test files on error).
- Corrected HTML periodic interim test results logging.
- Other minor corrections.
- Help updates.

Full Member    Редактировать | Профиль | Сообщение | Цитировать | Сообщить модераторуBurnInTest Professional 7.1 Build 1017 x32
BurnInTest Professional 7.1 Build 1017 x64