» SIV - System Information Viewer

---

System Information Viewer дает возможность оперативно следить за работой компьютера. В режиме реального времени она выводит информацию о температуре процессора, скорости вращения кулера, объеме свободной оперативной памяти, о величие файла подкачки, а также показывает степень загруженности системных ресурсов.
С ее помощью можно получить достаточно подробные сведения о разных компонентах компьютера: о процессоре, материнской плате памяти, жестких дисках, приводах, модемах. Например, для материнской платы можно узнать наличие встроенной сетевой карты, количество и типы портов, версию BOIS, поддерживаемый максимальный объем оперативной памяти и пр.
Интересен раздел, позволяющий получить подробную информацию о подключенных к компьютеру USB-устройствах. В отдельном окне выводится список всех доступных портов, расписаны их характеристики, а также указаны устройства, которые подключены к компьютеру посредством USB.
Наконец, еще одна полезная возможность System Information Viewer – вывод информации о компьютерах в локальной сети. При помощи программы можно установить, какая операционная система установлена на каждом из них, на базе каких процессоров работают компьютеры, сколько операционной памяти в каждой рабочей станции. Такая информация может быть полезна, если необходимо решать задачи, для которых требуется вычислительная мощность нескольких компьютеров, например, если нужно выполнить сетевую визуализацию в 3D-редакторе.

---

А ссылки где ?

Aleks78

Цитата:

А ссылки где ?

что-то оф.сайт не пашет, зеркало http://www.megaupload.com/?d=5MXJLC9I

Всё пашет.
Офсайт System Information Viewer

Прямые ссылки на закачку:
х32 - Ссылка
х64 - Ссылка

System Information Viewer 4.38.

System Information Viewer 4.41 Final




Цитата:

    Added Intel Atom (Cloverview) and initial AMD APU (Kaveri) support.
• Added initial SMSC SCH4307 support and resolved issue with -MONITOR mode.
• Updated Windows 8.1 Build 9600 ACPI Thermal Zone support.
• Added ACPI Embedded Controller Fan Speed ACPI Method deduction.
• Added the [Disk Status] panel and a control panel to setup the per Power Cycle Lost Time, Power-on Hours Base and Hour Time.
• Updated SMART reporting to support ASUS USB 3.0 Boost Turbo mode Disk Drives.
• Updated SMART to include the Device Nominal Form Factor and Data Set Management (TRIM) reporting.
• Updated screen layout for systems with more than 48 CPUs and removed -NOCHIP mode.
• Improved SIV start-up speed in general and especially for systems with multiple CPU Groups (more than 64 CPUs).
• Added RadiSys CEQM77HDE support and resolved issue with DIMM temperature reporting for SO-UDIMMs.

opt_step


Цитата:

Прямые ссылки на закачку: х32 - Ссылка х64 - Ссылка

Вы бы хоть прочитали для каких ОС эти ссылки

x32 - 32-bit SIV ASCII add-on that is needed for the legacy Windows 2000, NT4 and 9X systems.
x64 - IA-64 SIV Unicode add-on that should be used on Intel Itanium Enterprise Servers.
SIV64I.exe is not for AMD64 or Intel64 64-bit x64 systems.

Ссылка System Information Viewer 4.41 offsite - SIV Unicode Release Kit for Windows XP and later systems. You should use SIV32X.exe on 32-bit Windows x86 and SIV64X.exe on 64-bit Windows x64.

System Information Viewer 4.43


Цитата:

-Improved Ivy Bridge-E, added ASRock X79 Champion and updated X79 Extreme3/4/6 + Z68 Extreme4 motherboard support.
-Added support for ASRock multiplexed fans (usually two CPU fans) on the above motherboards.
-Changed [Lock Status] to use NtQueryMutant() and display the ASRock Fan Toggle times.
-Changed [USB Bus] to get the USB Controller Names using the Setup API rather than rely on the HCD names.
-Resolved issue with AMD Kabini and Trinity CPU Core and North Bridge power reporting.
-Allow for Opteron systems without any DIMMs present on CPU-0.

System Information Viewer 4.44

System Information Viewer 4.45

Цитата:

-Added the [Sound] panel to list the Rendering and Capture devices.
-Added the [Show Image] panel that displays the Image Headers for .EXE, .DLL and .SYS files.
-Corrected the reporting of Intel Celeron (Ivy Bridge) processors.
-Enhanced ASRock Z87 Extreme4 motherboard support.
-Resolved startup issue on some systems that have a UEFI only BIOS.
-Resolved issue with the [SIV Lookup] panel [WEBUPD] option only updating one file.
-Added support for Windows NT 3.51 with "new shell" and COMCTL32 5.81 installed.

System Information Viewer 4.46

Цитата:

-Update the [Windows] panel to display the Registered Processors plus Memory Allowed and added the [Windows Policies] panel for Vista and later.
-Added reporting of any Hypervisor Virtual Machine and for Windows 8.1 V6.03 Build 9600 if Update 1 is installed.
-Added the [Makers] panel which shows all the System and Motherboard Makers for all systems within a domain.
-Added reporting of the number of active memory channels for Intel 5000, 5400 and 7300 chipsets.
-Improve reporting of memory timing information on some Intel X38/X48 chipsets by enabling MCHBAR.
-Report the Peak GFLOPS for nVidia GTX/GT 700 series CUDA GPUs.
-Resolved issue with strange CPU % usage reporting that only happened on some Windows 7 x64 systems.
-Corrected the reporting of DDR3 DIMM SPD information for DIMMs with none zero FTB values.
-Improve the Controller Name for Texas Instruments XHCI Controller attached USB Disk Drives.
-Added support for the Intel D5400XS (Skulltrail) and Gigabyte Z97X-SOC Force motherboards including IR3580 PWMs.
-Compensate for Wine calling RaiseException() when SLGetWindowsInformation() is called.

4.47 released on 14-Sep-2014
-Improved Intel Core i7 (Haswell-E) and X99 Chipset support.
-Added support for Nuvoton NCT6791D sensors, ASUS H87M-PRO, Gigabyte Z87X-D3H and Intel DX48BT2 motherboards.
-Added support for Intersil ISL6379 PWMs and the ASRock X99 series motherboards.
-Added reporting of nVidia GPU Video clock speeds by using NVAPI_GPU_PUBLIC_CLOCK_VIDEO (new in R340 NVAPI).
-Added reporting of Corsair Link Temperature and Fan/Pump Speed for H100i, H80i, etc.. This is available only when Corsair Link is not active as Corsair Link does not use the Access_CorsairLink mutex to interlock access to the Corsair Integrated USB Bridge.
-Added support for Intel ACPI Power Management Devices (ACPI\INT33FD). Added exclusion for the ACPI \SAM_\UATB method.

System Information Viewer 4.48

Цитата:

-Added Windows 10 V6.04 Build 9841 support. Resolved operation of [PWR States], [ACPI Buses] and [ACPI Ports].
-Added support for nVidia GTX 980 plus GTX 970 (Maxwell) GPUs and the [GPU Lights] panel.
-Added ASUS Rampage IV Black Edition and ASRock Z77 Extreme6 support.
-Added support for Corsair Link channels and AX1500i + AX1200i support. Associate H100i and H80i Pumps with the CPUs.
-Added [Link Devices], [Link Fans] and [Link Lights] panels.

System Information Viewer 4.49

Цитата:

-Added support for the original Corsair Link Commander and H80/H100 cooling nodes. Revised the Corsair Link I/O code to use overlapped I/O and timeout the write and read operations after 250 ms. With these changes SIV should no longer stall if the Corsair Link hardware fails to respond to an I/O request. Enhanced Corsair AX760i, AX860i and HX850i power supply reporting. Extend [Link Status] to report any I/O errors.
-Added Gigabyte 990FXA-UD3 motherboard and International Rectifier IR3564B PWM support.
-Revised to cache physical memory mappings (MmMapIoSpace()) to avoid high DPC latencies caused when MmUnmapIoSpace() is called.

System Information Viewer 4.50

Цитата:

Added Windows 10 V6.04 Build 9879 support. Resolved operation of [ACPI Buses], [ACPI Eval] and [ACPI Ports].
Added the -CRLCTL command line qualifier to enable the SIV Corsair Link control facilities and ensure EnhancedPowerManagementEnabled is inactive. SIV Corsair Link control should only be enabled for one instance of SIV and when enabled SIV will automatically reload any saved control information when it starts and update temperature feedback every 2 seconds. Enhanced support for cycling colours, added [Save] to the [Link Lights] panel and updated [Reset] to reset to any saved values. Added Corsair Link Name customisation which is accessed via the [Link Status] panel. Improved H80 and H100 custom cooling setup.
Extended [Graphics] to support 64 rather than 16 displays and show as blocks of 4 displays. Added initial ECS H81H3 motherboard support.
Updated the [PCI BARs] panel to show PCI Bridge Prefetch, Memory and Unused areas.

System Information Viewer 4.51

Цитата:

Updated to use NVAPI R346 and report the GPU Video Clocks (NVAPI_GPU_PUBLIC_CLOCK_VIDEO).
Enhanced [Link Fans] to allow the temperature feedback sensor to be selected, but this currently this only works for CL Cooling Nodes and H100/H80 Coolers. I believe there are firmware issues with the CL Mini and H100i/H80i Coolers. Added initial H100iGT and H110iGT support. Updated HX1000i PSU support. Added the [link-dump] section to the save file which contains register dumps of all the devices listed on the [Link Status] panel.

System Information Viewer 5.00

Цитата:

Migrated from the SHA-1 to SHA-2 code signing. This has no real impact on most systems, but to use SIV V5 on W7 you need KB3033929 installed and on Vista x64 to disable Driver Signature Verification.
Added support for Windows 10 V10.00 Build 10074. Enabled operation of [ACPI HAL], [ACPI Buses], [ACPI Eval] and [ACPI Ports].
Resolved race condition when -CRLCTL is being used that causes intermittent issues on some systems.
Added Synthetic Temperatures (Menu->Tools->Configuration->Synthetic Setup) so custom curves can use the highest reading of multiple sensors and/or this can be displayed on the [Status] panel.
Added initial Intel Core i7 (Broadwell-H) and Intel Atom (Braswell) reporting.
Added ASRock Z97 OC Formula, ASUS MAXIMUS VII GENE, P8B75, P8Z77-V, Gigabyte Z97X-UD3, MSI MS-7881, Supermicro H8DMU and X10DAX motherboard support.
Extended ASUS Rampage IV motherboard support for embedded controller temperature, fan speed and voltage reporting.
Added Nuvoton W83793G SMBus hardware monitoring support.
Added the -SINGLE command line qualifier specify that only a single instance of SIV should be active.

System Information Viewer 5.01

Цитата:

Added support for Windows 10 V10.00 Build 10166. Enabled operation of [ACPI HAL], [ACPI Buses], [ACPI Eval] and [ACPI Ports].
Added AMD Godavari and Carrizo support. Improved Intel Braswell and Skylake support. Added PCH SMBus DDR4 DIMM SPD page support.
Resolved an issue with the incorrect bus speed being reported on some AMD FX-6350 Six-Core (Vishera) systems.
Added [Cooling Status] panel, -COOLING command line qualifier and support for DIMM temperatures as Synthetic Temperature components.
Added ASRock Z77 Extreme4, ASUS Rampage IV Formula, Rampage V Extreme, MSI MS-7583, MS-7816 and TYAN S2466 motherboard support.
Added Fintek F71868AD, Giantec GT34TS04 and Nuvoton NCT6793D sensor support. Added SMBIOS V3.0.0 reporting.
Added support for reporting LSI SAS2008/Dell 6Gbps SAS (LSI_SAS2 service) JBOD SATA drives.
Improved the I/O Space Mapping cache (see Menu->Hardware->CPU Detail->Map Unmap).

System Information Viewer 5.02

Цитата:

Added support for Windows 10 RTM V10.00 Build 10240. Enabled operation of [ACPI HAL], [ACPI Buses], [ACPI Eval] and [ACPI Ports].
Added [SIV Qualifiers] to setup the SIV Default Command Qualifiers that are used when none are specified.
Added the [Link Limits] page which shows the supported devices, current update usage and allows the effect of adding more hardware to be checked.
Added Corsair H110iGTX, H100iGTX, H80iGT and NZXT Kraken cooler reporting but as yet not full control.
To reflect the NZXT support rename all the titles to [AIO Link ...] and add -AIOCTL to be do the same as -CRLCRL (deprecated).
Improved the feedback on [Link Lights] when Temperature mode is being used.
Changed to show two temperatures for RMi PSUs.
Updated the [USB Bus] port details panels to enable IgnoreHWSerNum to be setup and [USB Flags] to show the IgnoreHWSerNum state.
Resolved [Link Devices] issue with a vast number of ghost HID devices and the PMBus Bridge + H80iGT Product ID (PID) conflict.
Added ASUS Maximus VI and Z97I-Plus motherboard support.
Block SIV Latest Release checks when running in -TRAY mode or SIV is minimised.

System Information Viewer 5.04

Version 5.04 released on 24-Oct-2015

Added support for Windows 10 TH2 V10.00 Build 10565. Enabled operation of [ACPI HAL], [ACPI Buses], [ACPI Eval] and [ACPI Ports].
Added Custom Curve support for Corsair AXi, HXi and RMi PSU fans.
Resolved issue with Disk Drives not being detected on some systems with some versions of the Intel RST driver.
Resolved issue with -GPUCTL fan control of some GTX 980 GPUs and improved support for 0 RPM GPU fan reporting.
Resolved issue with [My IP Address] that was caused by the http://ipinfodb.com/ servers changing.
Updated Skylake logos. Improved ASUS Z170 based motherboard support.
Improved the Core i3/i5 (Arrandale) and GM45 iGPU core speed reporting.
Added ASUS P9X79-E WS, Sabertooth X79, Z87-Pro, Dell 1557, 1757, 1564, 1764 and Alpha DS20 support.
Resolved issue with ACPI Eval on ASUS P9X79-E WS and some HP ZX1 based Itanium systems.
Allow for some nVidia GPUs only reporting limited Video Clock information.

http://rh-software.com/

System Information Viewer 5.09

Added support for Windows 10 RS1 V10.00 Build 14316. Enabled operation of [ACPI HAL], [ACPI Buses], [ACPI Eval] and [ACPI Ports].
Added AIO LEDs, rather more CPU + GPU information and Cut + Copy + Paste to LCD Panels. Allow selection of Themed or Standard LCDs.
Added ACPI Thermal Zone support to LCD Panels and Synthetics. Allow motherboard fan and some temperature names to be changed.
Added support for the ASUS Z10PE-D16 + Gigabyte Z87X-UD3 + X99-UD4 motherboards. Added SMSC SCH5627 + SCH5636 support.
Improved AMD Opteron (Interlagos) and (Zurich) support.
Added Antec Kuhler 1250 support. To enable this use [Link Devices] to set AIO-Kuhler-Enable in the Device Parameters.

http://www.rh-software.com/

System Information Viewer 5.10 14-Jun-2016

Цитата:

Added support for Windows 10 RS1 V10.00 Build 14361. Enabled operation of [ACPI HAL], [ACPI Buses], [ACPI Eval] and [ACPI Ports].
Added nVidia GTX 1080 and GTX 1070 (Pascal) support.
Added AIO + LCD Profile Export and Import support. When -AIOCTL is active doing an Import will automatically update the hardware.
Revised [STC Info] to show the worker thread Delay and % Load.
Added LCD Panel -WIZARD support and added more LCD display items such as the up-time.
Updated [Link Fans] to make subsequent Custom Points track changes. Resolved [Link Export] cooler check box initialisation.
Added detection of Haswell-E + Broadwell-E 100MHz rather than 133MHz memory clock. On Haswell-E the L3 Cache speed is the System Agent speed.
Added System Power Usage for recent ASUS motherboards. Resolved ASUS Rampage V Extreme CSM disabled X99 SMBus issue.
Added ASRock 970 Extreme4 + X99E + ASUS Sabertooth X58 + Z87 + Z170I + CLEVO P150EM + P170EM + ECS A890GXM + Lenovo 4318 and improved ASUS X99-Deluxe + Fujitsu MX130 + MSI MS-7881 support. Optimised SMSC SCH5627 access.
Resolved issue with Tray Icon menus when they are used from other than the initial screen that has existed since SIV 4.50. Allow for changes to the [My IP Address] server.

System Information Viewer 5.12 released on 14-Aug-2016

Version 5.12 released on 14-Aug-2016

Added support for Windows 10 RS2 V10.00 Build 14901. Enabled operation of [ACPI HAL], [ACPI Buses], [ACPI Eval] and [ACPI Ports].
Improved NVMe Disk SMART reporting on Windows 10 systems and added Intel NVMe (IaNVMe service) support.
Added ASUS Gryphon Z87 + Gryphon Z97 + MSI MS-7885 motherboard support. Improved ASUS Z97 support.
Added VIA Eden X4 + QuadCore (Isaiah II, CNR) support.
Resolved issue with the SIV Tray Icon sometimes being missing when auto-run is used and after a shell restart.
Added Topmost support to LCD panels.
Added a hold-off delay before CoolIT (CL Mini, H110i, etc.) controlled fans will slow down and [Link Setup] to set this delay.
Allow for CL 4.2.4.25 using Global\CorsairLinkReadWriteGuardMutex rather than Global\Access_CorsairLink.
Corrected reporting of CreateFile() failures and improved reading of H115i + H100iV2 + H80iV2 cooler information.
Added initial AMD Zen support and corrected AMD Bulldozer to report as cores (modules) that have two logical processors (integer cores).

http://sivkit.96.lt/siv.zip