народ! вообщем писал я изошку на болванку и выдало ошибку
я поставил Имитацию, в настройках
когда сделала её все ок, а потом почему то ошибка
[more=Вот лог]
1A21-0609-3030-2315-6600-0418
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.68, size=160016 bytes, created 28/07/2004 16:51:12
Nero version: 6.6.0.1
Recorder: <SONY CD-RW CRX230E> Version: QYS1 - HA 1 TA 0 - 6.6.0.1
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <SONY CD-RW CRX230E >Version: QYS1 - HA 1 TA 0 - 6.6.0.1
Adapter driver: <atapi> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD800JB-00FMA0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : SONY CD-RW CRX230E atapi Port 1 ID 0 DMA: On
CdRomPeripheral : AXV CD/DVD-ROM 2.2a a347scsi Port 2 ID 0 DMA: Off
=== CDRom-Device-Map ===
SONY CD-RW CRX230E E: CDRom0
AXV CD/DVD-ROM F: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523500kB)
Free physical memory: 205MB (210380kB)
Memory in use : 59 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
9.8.2005
CD Image
12:13:31#1 Text 0 File Burncd.cpp, Line 2832
SONY CD-RW CRX230E
Buffer under-run error protection activated
12:13:31#2 Text 0 File Reader.cpp, Line 127
Reader running
12:13:31#3 Text 0 File Writer.cpp, Line 122
Writer SONY CD-RW CRX230E running
12:13:31#4 Text 0 File Burncd.cpp, Line 3117
Turn on Disc-at-once, using CD-R/RW media
12:13:32#5 Text 0 File DlgWaitCD.cpp, Line 256
Last possible write address on media: 359848 ( 79:59.73)
Last address to be written: 356295 ( 79:12.45)
12:13:32#6 Text 0 File DlgWaitCD.cpp, Line 268
Write in overburning mode: NO (enabled: CD)
12:13:32#7 Text 0 File DlgWaitCD.cpp, Line 2309
Recorder: SONY CD-RW CRX230E;
CDR code: 00 97 27 18; OSJ entry from: Plasmon Data systems Ltd.
ATIP Data:
Special Info [hex] 1: 00 00 00, 2: 00 00 00 (LI 0:00.00), 3: 00 00 00 (LO 0:00.00)
Additional Info [hex] 1: 00 00 00 (invalid), 2: 00 00 00 (invalid), 3: 00 00 00 (invalid)
12:13:32#8 Text 0 File DlgWaitCD.cpp, Line 430
>>> Protocol of DlgWaitCD activities: <<<
=========================================
12:13:32#9 Text 0 File ThreadedTransferInterface.cpp, Line 844
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, Joliet)
2 indices, index0 (150) not provided
original disc pos #0 + 356296 (356296) = #356296/79:10.46
relocatable, disc pos for caching/writing not required/not required, patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 356296 blocks [SONY CD-RW CRX230E]
--------------------------------------------------------------
12:13:33#10 Text 0 File ThreadedTransferInterface.cpp, Line 1047
Prepare recorder [SONY CD-RW CRX230E] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 730001408, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
-150 | lead-in | 0 | 0x00 | 0x41
-150 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
356296 | lead-out | 1 | 0x00 | 0x41
12:13:33#11 Phase 32 File dlgbrnst.cpp, Line 1853
Simulation started at 12x (1,800 KB/s)
12:13:33#12 Text 0 File ThreadedTransferInterface.cpp, Line 2497
Verifying disc position of item 0 (relocatable, no disc pos, patch infos, orig at #0): write at #0
12:13:34#13 Text 0 File Mmc.cpp, Line 16025
StartDAO : CD-Text - Off
12:13:34#14 Text 0 File Mmc.cpp, Line 20673
Set BUFE: Buffer under-run error protection -> ON , SMART-BURN : ON
12:13:34#15 Text 0 File Mmc.cpp, Line 16312
CueData, Len=32
41 00 00 14 00 00 00 00
41 01 00 10 00 00 00 00
41 01 01 10 00 00 02 00
41 aa 01 14 00 4f 0c 2e
12:20:28#16 Text 0 File WriterStatus.cpp, Line 116
<SONY CD-RW CRX230E > start writing Lead-Out at LBA 356296 (56FC8h), lenght 0 blocks
12:20:28#17 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion
12:20:37#18 Text 0 File dlgbrnst.cpp, Line 1711
Set remaining time: 0:00,000 (0ms) -> OK
12:20:40#19 Phase 33 File dlgbrnst.cpp, Line 1853
Simulation completed successfully at 12x (1,800 KB/s)
12:20:41#20 Phase 36 File dlgbrnst.cpp, Line 1853
Burn process started at 12x (1,800 KB/s)
12:20:42#21 Text 0 File ThreadedTransferInterface.cpp, Line 2497
Verifying disc position of item 0 (relocatable, no disc pos, patch infos, orig at #0): write at #0
12:20:42#22 Text 0 File Mmc.cpp, Line 16025
StartDAO : CD-Text - Off
12:20:42#23 Text 0 File Mmc.cpp, Line 20673
Set BUFE: Buffer under-run error protection -> ON , SMART-BURN : ON
12:20:42#24 Text 0 File Mmc.cpp, Line 16312
CueData, Len=32
41 00 00 14 00 00 00 00
41 01 00 10 00 00 00 00
41 01 01 10 00 00 02 00
41 aa 01 14 00 4f 0c 2e
12:27:34#25 SCSI -1135 File Cdrdrv.cpp, Line 1432
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x03620000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x05 0x61 0xC0 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x0C 0x00
12:27:34#26 CDR -1135 File Writer.cpp, Line 311
Write error
12:27:34#27 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion
12:27:35#28 Text 0 File dlgbrnst.cpp, Line 1711
Set remaining time: 0:00,000 (0ms) -> OK
12:27:35#29 Phase 38 File dlgbrnst.cpp, Line 1853
Burn process failed at 12x (1,800 KB/s)
Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.02.62a, size=20016 bytes, created 28/10/2003 12:02:00 (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=?.?.?.?, size=86912 bytes, created 29/08/2002 01:27:50 (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
[/more]
подскажите плиз в чем трабла ?
я поставил Имитацию, в настройках
когда сделала её все ок, а потом почему то ошибка
[more=Вот лог]
1A21-0609-3030-2315-6600-0418
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.68, size=160016 bytes, created 28/07/2004 16:51:12
Nero version: 6.6.0.1
Recorder: <SONY CD-RW CRX230E> Version: QYS1 - HA 1 TA 0 - 6.6.0.1
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <SONY CD-RW CRX230E >Version: QYS1 - HA 1 TA 0 - 6.6.0.1
Adapter driver: <atapi> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD800JB-00FMA0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : SONY CD-RW CRX230E atapi Port 1 ID 0 DMA: On
CdRomPeripheral : AXV CD/DVD-ROM 2.2a a347scsi Port 2 ID 0 DMA: Off
=== CDRom-Device-Map ===
SONY CD-RW CRX230E E: CDRom0
AXV CD/DVD-ROM F: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523500kB)
Free physical memory: 205MB (210380kB)
Memory in use : 59 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
9.8.2005
CD Image
12:13:31#1 Text 0 File Burncd.cpp, Line 2832
SONY CD-RW CRX230E
Buffer under-run error protection activated
12:13:31#2 Text 0 File Reader.cpp, Line 127
Reader running
12:13:31#3 Text 0 File Writer.cpp, Line 122
Writer SONY CD-RW CRX230E running
12:13:31#4 Text 0 File Burncd.cpp, Line 3117
Turn on Disc-at-once, using CD-R/RW media
12:13:32#5 Text 0 File DlgWaitCD.cpp, Line 256
Last possible write address on media: 359848 ( 79:59.73)
Last address to be written: 356295 ( 79:12.45)
12:13:32#6 Text 0 File DlgWaitCD.cpp, Line 268
Write in overburning mode: NO (enabled: CD)
12:13:32#7 Text 0 File DlgWaitCD.cpp, Line 2309
Recorder: SONY CD-RW CRX230E;
CDR code: 00 97 27 18; OSJ entry from: Plasmon Data systems Ltd.
ATIP Data:
Special Info [hex] 1: 00 00 00, 2: 00 00 00 (LI 0:00.00), 3: 00 00 00 (LO 0:00.00)
Additional Info [hex] 1: 00 00 00 (invalid), 2: 00 00 00 (invalid), 3: 00 00 00 (invalid)
12:13:32#8 Text 0 File DlgWaitCD.cpp, Line 430
>>> Protocol of DlgWaitCD activities: <<<
=========================================
12:13:32#9 Text 0 File ThreadedTransferInterface.cpp, Line 844
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, Joliet)
2 indices, index0 (150) not provided
original disc pos #0 + 356296 (356296) = #356296/79:10.46
relocatable, disc pos for caching/writing not required/not required, patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 356296 blocks [SONY CD-RW CRX230E]
--------------------------------------------------------------
12:13:33#10 Text 0 File ThreadedTransferInterface.cpp, Line 1047
Prepare recorder [SONY CD-RW CRX230E] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 730001408, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
-150 | lead-in | 0 | 0x00 | 0x41
-150 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
356296 | lead-out | 1 | 0x00 | 0x41
12:13:33#11 Phase 32 File dlgbrnst.cpp, Line 1853
Simulation started at 12x (1,800 KB/s)
12:13:33#12 Text 0 File ThreadedTransferInterface.cpp, Line 2497
Verifying disc position of item 0 (relocatable, no disc pos, patch infos, orig at #0): write at #0
12:13:34#13 Text 0 File Mmc.cpp, Line 16025
StartDAO : CD-Text - Off
12:13:34#14 Text 0 File Mmc.cpp, Line 20673
Set BUFE: Buffer under-run error protection -> ON , SMART-BURN : ON
12:13:34#15 Text 0 File Mmc.cpp, Line 16312
CueData, Len=32
41 00 00 14 00 00 00 00
41 01 00 10 00 00 00 00
41 01 01 10 00 00 02 00
41 aa 01 14 00 4f 0c 2e
12:20:28#16 Text 0 File WriterStatus.cpp, Line 116
<SONY CD-RW CRX230E > start writing Lead-Out at LBA 356296 (56FC8h), lenght 0 blocks
12:20:28#17 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion
12:20:37#18 Text 0 File dlgbrnst.cpp, Line 1711
Set remaining time: 0:00,000 (0ms) -> OK
12:20:40#19 Phase 33 File dlgbrnst.cpp, Line 1853
Simulation completed successfully at 12x (1,800 KB/s)
12:20:41#20 Phase 36 File dlgbrnst.cpp, Line 1853
Burn process started at 12x (1,800 KB/s)
12:20:42#21 Text 0 File ThreadedTransferInterface.cpp, Line 2497
Verifying disc position of item 0 (relocatable, no disc pos, patch infos, orig at #0): write at #0
12:20:42#22 Text 0 File Mmc.cpp, Line 16025
StartDAO : CD-Text - Off
12:20:42#23 Text 0 File Mmc.cpp, Line 20673
Set BUFE: Buffer under-run error protection -> ON , SMART-BURN : ON
12:20:42#24 Text 0 File Mmc.cpp, Line 16312
CueData, Len=32
41 00 00 14 00 00 00 00
41 01 00 10 00 00 00 00
41 01 01 10 00 00 02 00
41 aa 01 14 00 4f 0c 2e
12:27:34#25 SCSI -1135 File Cdrdrv.cpp, Line 1432
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x03620000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x05 0x61 0xC0 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x0C 0x00
12:27:34#26 CDR -1135 File Writer.cpp, Line 311
Write error
12:27:34#27 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion
12:27:35#28 Text 0 File dlgbrnst.cpp, Line 1711
Set remaining time: 0:00,000 (0ms) -> OK
12:27:35#29 Phase 38 File dlgbrnst.cpp, Line 1853
Burn process failed at 12x (1,800 KB/s)
Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.02.62a, size=20016 bytes, created 28/10/2003 12:02:00 (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=?.?.?.?, size=86912 bytes, created 29/08/2002 01:27:50 (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
[/more]
подскажите плиз в чем трабла ?