» GoodSync
Взяла обновилась, до 9.8.4.4 там появился пункт в Настройках Задания-Дополнительно - Move Mode: Delete Empty Folders after Copy... Он мне портит всю структуру, что этот пункт делает ... Программа забирает с папок на DropBox файлы, и папки в которых файлы ушли на компьютер естественно становятся ПУСТЫМИ, и вот в этой версии, пустые папки GoodSync удаляет, а они мне нужны ПУСТЫЕ, так как в эти пустые папки на DropBox я выкладываю на рабочем компьютере файлы которые должны синхронизироваться на домашнем компьютере, на DropBox файлы не остаються, только структцра папок, т.е. эти пустые папки мне нужны как временное перевалочное хранилище... На более младших версиях такого пункта не было и всё было хорошо... и вот теперь,.... 
Убираю с пункта галку, после перезапуска компьютера она ставится самостоятельно... Если ли решение ребята проблемы..?
Убираю с пункта галку, после перезапуска компьютера она ставится самостоятельно... Если ли решение ребята проблемы..?стала вдруг формировать путь при добавлении задания типа %GSDISK% и выдает окошко с предупреждением
"Changed portable disk letter to %GSDISK% (disk from which GoodSync started), so that it works in another computer"
Что за хрень, а? Чего хочет? Не пойму, помогите разобраться пожалуйста
"Changed portable disk letter to %GSDISK% (disk from which GoodSync started), so that it works in another computer"
Что за хрень, а? Чего хочет? Не пойму, помогите разобраться пожалуйста
Может найдется у кого свободная минутка, кто нибудь сталкивался?
GoodSync 9.8.5.5
Изменения:
* New Unattended mode for all Auto options, run by GoodSync Runner Service.
* Runner Service runs Unattended Auto jobs even when you are logged off.
* New On Schedule Auto option, runs natively iin Runner service, without Windows Task Scheduler.
* On Schedule Auto option specifies Minutes, Hours, DayOfMonth, Month. DayOfWeek when to run.
* Runner Service runs under your Winodws User credentials, so it requests them on install.
* GoodSync GUI shows status of Unattended jobs, but you cannot see or change sync tree.
* When new GoodSync is installed, remove all Windows Tasks created by old GS versions.
* Speed up User Inteface, by using more efficient signalling techniques.
* When deleting or renaming job that has file monitoring, stop monitoring first.
* SyncLib: Fix non-propagating of generations for deleted items that resulted in conflicts upon revival.
* SyncLib: Fix deleting items that have all their generations deleted as too old.
* SyncLib: reading state file: preserve extra info (MD5, ACL, ExtAttr) even if this job does not need it.
* SyncLib: fix diagnostics of duplicate items when folder that differ only by name case appear.
* SyncLib: writing state file: always write out root node, or esle we may get EOF error on read.
* SyncLib: fix errors related to case-sensitive file systems and names that differ only by case.
* Do not delete sync tree and do not change run status of this job when intersecting job starts to Sync.
The idea is to preserve job run state, and only clicking Sync will show State File Changed error.
* Make default-level log shorter: show only start and end of Analyze and Sync and actual file actions.
* Stopping Jobs: make it faster by forcefully disconnecting sync folders.
* Prohibited file name charadcters: add | and * and " to the list, as Windows prohibits them.
* Google Drive: fix errors caused by concurrency vs caching.
* GSTP server: report mod-time, cre-time as unsigned long ints, as we are crossing 32-bit half-time.
* GSTP server: do SetFileOwner on server who knows not to do it for shares that do not accept it.
* Options: Move Cleanup Generations option from Job to Program Options.
* Restore saving/loading of Delete Empty Folders option.
* Command Line: Move all command line operations to GSYNC from GoodSync GUI.
* Command Line: GoodSync (GUI) now supports only coomand line option that affect GUI.
* Command Line: Remove /unatt Unattended mode of GoodSync.exe, as we have our own Scheduler.
Изменения:
* New Unattended mode for all Auto options, run by GoodSync Runner Service.
* Runner Service runs Unattended Auto jobs even when you are logged off.
* New On Schedule Auto option, runs natively iin Runner service, without Windows Task Scheduler.
* On Schedule Auto option specifies Minutes, Hours, DayOfMonth, Month. DayOfWeek when to run.
* Runner Service runs under your Winodws User credentials, so it requests them on install.
* GoodSync GUI shows status of Unattended jobs, but you cannot see or change sync tree.
* When new GoodSync is installed, remove all Windows Tasks created by old GS versions.
* Speed up User Inteface, by using more efficient signalling techniques.
* When deleting or renaming job that has file monitoring, stop monitoring first.
* SyncLib: Fix non-propagating of generations for deleted items that resulted in conflicts upon revival.
* SyncLib: Fix deleting items that have all their generations deleted as too old.
* SyncLib: reading state file: preserve extra info (MD5, ACL, ExtAttr) even if this job does not need it.
* SyncLib: fix diagnostics of duplicate items when folder that differ only by name case appear.
* SyncLib: writing state file: always write out root node, or esle we may get EOF error on read.
* SyncLib: fix errors related to case-sensitive file systems and names that differ only by case.
* Do not delete sync tree and do not change run status of this job when intersecting job starts to Sync.
The idea is to preserve job run state, and only clicking Sync will show State File Changed error.
* Make default-level log shorter: show only start and end of Analyze and Sync and actual file actions.
* Stopping Jobs: make it faster by forcefully disconnecting sync folders.
* Prohibited file name charadcters: add | and * and " to the list, as Windows prohibits them.
* Google Drive: fix errors caused by concurrency vs caching.
* GSTP server: report mod-time, cre-time as unsigned long ints, as we are crossing 32-bit half-time.
* GSTP server: do SetFileOwner on server who knows not to do it for shares that do not accept it.
* Options: Move Cleanup Generations option from Job to Program Options.
* Restore saving/loading of Delete Empty Folders option.
* Command Line: Move all command line operations to GSYNC from GoodSync GUI.
* Command Line: GoodSync (GUI) now supports only coomand line option that affect GUI.
* Command Line: Remove /unatt Unattended mode of GoodSync.exe, as we have our own Scheduler.
GoodSync 9.8.6.6
Изменения:
* Restore command line in GoodSync.exe, although it is still recommended to use it in Gsync.exe.
* Ask user before deleting Windows tasks that call GoodSync.
* Message boxes: make Yes / OK to be default choice, used to be No / Cancel.
* Unattended mode: Show job Elapsed Time.
* Runner Service Installer: do not install Runner Serevice if installed from MSI.
* Add Tools -> Setup Runner Service menu to setup Runner Service.
Изменения:
* Restore command line in GoodSync.exe, although it is still recommended to use it in Gsync.exe.
* Ask user before deleting Windows tasks that call GoodSync.
* Message boxes: make Yes / OK to be default choice, used to be No / Cancel.
* Unattended mode: Show job Elapsed Time.
* Runner Service Installer: do not install Runner Serevice if installed from MSI.
* Add Tools -> Setup Runner Service menu to setup Runner Service.
GoodSync 9.8.7.5
Изменения:
* On Schedule: Allow ranges and steps as elements of list of Int Values in time fields.
* On Schedule: schedules from 9.8.5 and 9.8.6 have to be redone, because of ranges/steps.
* On Schedule: implement waking up from Sleep/Standby when job is about to auto-start.
* Runner Service: do not show message boxes in it, there is no nobody to see them.
* gsync: Fix not reporting of log folder error in /lf=, improve error processing.
* Job Scheduler: Speed it up by rearranging check sequence.
Изменения:
* On Schedule: Allow ranges and steps as elements of list of Int Values in time fields.
* On Schedule: schedules from 9.8.5 and 9.8.6 have to be redone, because of ranges/steps.
* On Schedule: implement waking up from Sleep/Standby when job is about to auto-start.
* Runner Service: do not show message boxes in it, there is no nobody to see them.
* gsync: Fix not reporting of log folder error in /lf=, improve error processing.
* Job Scheduler: Speed it up by rearranging check sequence.
GoodSync 9.8.8.5
Изменения:
* OneDrive: fix problems in uploading photos (JPG files).
* SyncLib: detect when uploaded file changes its size on the server (OneDrive can do it).
* On Schedule: fix waking up from Sleep/Standby.
* On Schedule Config: add Test button, to show schedule of job runs.
* Multiple GoodSync Instances: improve detection of them, fix some issues.
* Installer: consolidate stopping GS services and closing EXEs, so that installer runs faster.
Изменения:
* OneDrive: fix problems in uploading photos (JPG files).
* SyncLib: detect when uploaded file changes its size on the server (OneDrive can do it).
* On Schedule: fix waking up from Sleep/Standby.
* On Schedule Config: add Test button, to show schedule of job runs.
* Multiple GoodSync Instances: improve detection of them, fix some issues.
* Installer: consolidate stopping GS services and closing EXEs, so that installer runs faster.
Подскажите, в GoodSync есть какая нибудь возможность защитить файлы и папки? При выполнении задания по копированию файлов по локальной сети в общий каталог, есть возможность их как нибудь защитить?
GoodSync 9.8.8.8
Изменения:
* On Schedule: more fixes to wakeup timer management.
* Runner Service: make it work for Limited user.
* Runner Service: restart (not remove it) for other users on GoodSync reinstall.
* Instances: make GoodSync instance detection work correctly in No UAC mode.
* Disk Letters mapped to Windows Shares are not visible in Services (by Windows design):
(a) Ask user to to change Disk Letter to UNC path in Browse dialog.
(b) Keep a list of Mapped Drives (Letters -> Shares) and use it to mount shares in Services.
Изменения:
* On Schedule: more fixes to wakeup timer management.
* Runner Service: make it work for Limited user.
* Runner Service: restart (not remove it) for other users on GoodSync reinstall.
* Instances: make GoodSync instance detection work correctly in No UAC mode.
* Disk Letters mapped to Windows Shares are not visible in Services (by Windows design):
(a) Ask user to to change Disk Letter to UNC path in Browse dialog.
(b) Keep a list of Mapped Drives (Letters -> Shares) and use it to mount shares in Services.
GoodSync 9.8.9.5
Изменения:
* OneDrive: workaround for OD reports incorrect size after upload, for small .JPG files.
* Installer: improve and speedup install and uninstall sequences.
* Installer: Do not delete GS and GS Explorer desktop shortcuts, on reinstall.
* Installer: Fix problems in install of GS by multiple users, and from Limited user.
* Runner Service, Server Service: more secure storage of user credentials.
* Fully separate setup of Runner and Server services.
* Runner Service: allow Windows password to be empty, although Windows would object.
* Fix crashes in processing of a spurious out-of-range time (after year 2038).
* On File Change: fix Analyze error processing, it was not always reporting.
Изменения:
* OneDrive: workaround for OD reports incorrect size after upload, for small .JPG files.
* Installer: improve and speedup install and uninstall sequences.
* Installer: Do not delete GS and GS Explorer desktop shortcuts, on reinstall.
* Installer: Fix problems in install of GS by multiple users, and from Limited user.
* Runner Service, Server Service: more secure storage of user credentials.
* Fully separate setup of Runner and Server services.
* Runner Service: allow Windows password to be empty, although Windows would object.
* Fix crashes in processing of a spurious out-of-range time (after year 2038).
* On File Change: fix Analyze error processing, it was not always reporting.
GoodSync 9.9.0.7
Изменения:
* On File Change: collect all recent changes just before Analyze, to prevent wrong sync.
* Mapped Network Drives: improve collection and listing from GS Runner/Server of these.
* Sym Links to Folders on Windows: fix several issues related to their creation and deletion.
* Windows 8: when listing ~HomeUser use Display User Name not Profile User Name, as they differ.
* Runner Service + SetFileOwner on close: do not insist on it, may be OK without it.
* Encrypted FS: do not adjust file size for non-file objects, such as links and folders.
* GS Server: fix a rare deadlock that was actually observed.
* Fix 'Runner Service Setup' opens GS Connect Setup in Always Elevated Windows acct.
* When writing state file, embed lock file info in it, to show who created the file.
* Analyze: Show number of changes, errors, conflicts, All Nodes in short version of log.
* Upgrade to OpenSSL ver 1.0.1h that fixes several security problems.
Изменения:
* On File Change: collect all recent changes just before Analyze, to prevent wrong sync.
* Mapped Network Drives: improve collection and listing from GS Runner/Server of these.
* Sym Links to Folders on Windows: fix several issues related to their creation and deletion.
* Windows 8: when listing ~HomeUser use Display User Name not Profile User Name, as they differ.
* Runner Service + SetFileOwner on close: do not insist on it, may be OK without it.
* Encrypted FS: do not adjust file size for non-file objects, such as links and folders.
* GS Server: fix a rare deadlock that was actually observed.
* Fix 'Runner Service Setup' opens GS Connect Setup in Always Elevated Windows acct.
* When writing state file, embed lock file info in it, to show who created the file.
* Analyze: Show number of changes, errors, conflicts, All Nodes in short version of log.
* Upgrade to OpenSSL ver 1.0.1h that fixes several security problems.
Есть ли возможность у сабжа синхронизировать сразу несколько папок? Слева нашел возможность выбрать две папки, а справа нет
Подскажите по опции "Авто" - "При изменении файла". Как это работает технически?
Допустим, у меня каталог рабочих файлов на 10ГБ. Диск SSD, синхронизация на флешку.
Не убьет ли такая синхронизация оба накопителя постоянным мониторингом?
Допустим, у меня каталог рабочих файлов на 10ГБ. Диск SSD, синхронизация на флешку.
Не убьет ли такая синхронизация оба накопителя постоянным мониторингом?
GoodSync 9.9.1.1
Изменения:
* Media Devices (MTP) file system added as Beta: works on Windows 7/8, not on XP.
* Windows Shares: improve code that manages mapped drives.
* On Logoff: Fix only one of several On Logoff jobs runs.
* On Logoff: make running job Current in GUI, to inform user about what runs.
* On File Change + Sleeping: stop file monitoring on Sleep, restore it on wake-up.
* SkyDrive: fix getting size info of jpg/png files.
* FTP upload: Allow line code 125 to come after code 150.
* Pre-Analyze: send email with no logs if Pre-Analyze email is specified.
* Server Impersonation: fix leak in Login sessions.
* Server: improve locking between transactions coming to the session.
* Migrate GoodSync compilation from VS 2005 to VS 2012.
* Use job's Reconnect Timeout in Browse dialog FS operation.
Изменения:
* Media Devices (MTP) file system added as Beta: works on Windows 7/8, not on XP.
* Windows Shares: improve code that manages mapped drives.
* On Logoff: Fix only one of several On Logoff jobs runs.
* On Logoff: make running job Current in GUI, to inform user about what runs.
* On File Change + Sleeping: stop file monitoring on Sleep, restore it on wake-up.
* SkyDrive: fix getting size info of jpg/png files.
* FTP upload: Allow line code 125 to come after code 150.
* Pre-Analyze: send email with no logs if Pre-Analyze email is specified.
* Server Impersonation: fix leak in Login sessions.
* Server: improve locking between transactions coming to the session.
* Migrate GoodSync compilation from VS 2005 to VS 2012.
* Use job's Reconnect Timeout in Browse dialog FS operation.
GoodSync 9.9.2.2
Изменения:
* Windows 8 + 64 bits + more than 4 Gb memory: fix crashes.
* Windows XP: fix Error 193, caused by new VS 2012 compilation.
* Fix Access Denied on deleting symbolic link to non-existent folder.
Изменения:
* Windows 8 + 64 bits + more than 4 Gb memory: fix crashes.
* Windows XP: fix Error 193, caused by new VS 2012 compilation.
* Fix Access Denied on deleting symbolic link to non-existent folder.
GoodSync 9.9.2.9
Изменения:
* Windows Shares: disconnect them after all jobs are not using them.
* Windows FS: call CancelSynchronousIo() on user stop, to make it stop faster.
* On Logoff: fix On Logoff jobs do not fire, if a job is running before Logoff.
* Deleting Recycled/State Files: fixed error/ok message.
* Windows 8 + 64 bits + more than 4 Gb memory: fix crashes.
* Foldeer Trees: fix crashes on Windows-8 if address randomization is On.
* Windows XP: fix Error 193, caused by new VS 2012 compilation.
* Fix Access Denied on deleting symbolic link to non-existent folder.
Изменения:
* Windows Shares: disconnect them after all jobs are not using them.
* Windows FS: call CancelSynchronousIo() on user stop, to make it stop faster.
* On Logoff: fix On Logoff jobs do not fire, if a job is running before Logoff.
* Deleting Recycled/State Files: fixed error/ok message.
* Windows 8 + 64 bits + more than 4 Gb memory: fix crashes.
* Foldeer Trees: fix crashes on Windows-8 if address randomization is On.
* Windows XP: fix Error 193, caused by new VS 2012 compilation.
* Fix Access Denied on deleting symbolic link to non-existent folder.
GoodSync 9.9.3.3
Изменения:
* GSTP Server: improve impersonation for Receiver and Direct connection.
* On File Change: make file monitoring work in Encrypted file system.
* Fix if GS is exited right after start, it may not stop right away due to log cleanup.
* Explorer: Show both encrypted and decrypted versions of connectoids for encrypted side.
* Explorer: fix error processing, fix overwrite dialogs not shown.
* Explorer: do not ask user confirmation for Copy and Move, ask it only for Delete.
* If file system long-disconnects then do not perform closing operations that will timeout too.
* Add to Job Option -> Auto: Conflict Resolution: Rename Losing file, do not delete it.
* FTP: Return correct error on non-accept in Active FTP mode.
* MTP: Removed 'Device' level. Replaced Letter: inside Device with 'Storage'.
* Options: Increase Seconds to Reconnect to 6 digits positions (up tp 11-day timeout).
Изменения:
* GSTP Server: improve impersonation for Receiver and Direct connection.
* On File Change: make file monitoring work in Encrypted file system.
* Fix if GS is exited right after start, it may not stop right away due to log cleanup.
* Explorer: Show both encrypted and decrypted versions of connectoids for encrypted side.
* Explorer: fix error processing, fix overwrite dialogs not shown.
* Explorer: do not ask user confirmation for Copy and Move, ask it only for Delete.
* If file system long-disconnects then do not perform closing operations that will timeout too.
* Add to Job Option -> Auto: Conflict Resolution: Rename Losing file, do not delete it.
* FTP: Return correct error on non-accept in Active FTP mode.
* MTP: Removed 'Device' level. Replaced Letter: inside Device with 'Storage'.
* Options: Increase Seconds to Reconnect to 6 digits positions (up tp 11-day timeout).
GoodSync 9.9.3.7
Изменения:
* Make GoodSync work on old Athlon and AMD processors that do not have SSE2.
Изменения:
* Make GoodSync work on old Athlon and AMD processors that do not have SSE2.
GoodSync 9.9.4.4
Изменения:
* OneDrive Pro (SharePoint): Add this new file system, not related to OneDrive.
* Multi-Thread Sync: fix freeze on bail out from terminal sync errors.
* WebDAV: fix user stop does not become effective immediately.
* Update job status shown in sync tree, at the top folder line.
* GS Server/Receiver: tighten up locks, to avoid parallelism-related errors.
* Speed up termination of job if file system becomes long-disconnected.
* GSTP client: Fix Auth may fail if direct addressing (no .goodsync suffix) is used.
* Make GoodSync work on old Athlon and AMD processor do not have SSE2 instructions.
Изменения:
* OneDrive Pro (SharePoint): Add this new file system, not related to OneDrive.
* Multi-Thread Sync: fix freeze on bail out from terminal sync errors.
* WebDAV: fix user stop does not become effective immediately.
* Update job status shown in sync tree, at the top folder line.
* GS Server/Receiver: tighten up locks, to avoid parallelism-related errors.
* Speed up termination of job if file system becomes long-disconnected.
* GSTP client: Fix Auth may fail if direct addressing (no .goodsync suffix) is used.
* Make GoodSync work on old Athlon and AMD processor do not have SSE2 instructions.
Ребята, очень надеюсь на Вашу помощь... Суть проблемы после некоторых манипуляций (возможно, в этом я не уверена) анализ и синхронизация файлов и папок на внешние носители стал происходить интересным образом, быстро проходит порядка 70-80% а потом застревает на минут 15... , ранее такого не происходило, все происходило гораздо быстрее без остановок и задержек, в чем может быть причина, где смотреть-копать..?
suomifinland
Цитата:
Может, например, зависать из-за этого:
Цитата:
быстро проходит порядка 70-80% а потом застревает на минут 15... , ранее такого не происходило, все происходило гораздо быстрее бе
Может, например, зависать из-за этого:
GoodSync 9.9.5.5
Изменения:
Version 9.9.5 Aug 25, 2014
* Add Office365 file system which is mostly SharePoint with OAuth2.
* OneDrivePro/SharePoint FS: Fix long URI problem with MoveFile and CopyFile.
* On File Change: fix First Full Analyze does not fully reset the sync tree.
* Job Status: improve showing correct visual job status.
* GoodSync Close: fix waiting for not-owned jobs (Full GUI vs Runner).
* Installer: when installer closes GoodSync, does not ask user whether to close.
* GS server Local Elevation: fix auth problem on reconnect after timeout.
* WinFileSys + Elevation: Local Account on GS server needs System User ID to SetFileOwner.
* WinFileSys: Use GetAttributes with elevation in SetAttributes.
Изменения:
Version 9.9.5 Aug 25, 2014
* Add Office365 file system which is mostly SharePoint with OAuth2.
* OneDrivePro/SharePoint FS: Fix long URI problem with MoveFile and CopyFile.
* On File Change: fix First Full Analyze does not fully reset the sync tree.
* Job Status: improve showing correct visual job status.
* GoodSync Close: fix waiting for not-owned jobs (Full GUI vs Runner).
* Installer: when installer closes GoodSync, does not ask user whether to close.
* GS server Local Elevation: fix auth problem on reconnect after timeout.
* WinFileSys + Elevation: Local Account on GS server needs System User ID to SetFileOwner.
* WinFileSys: Use GetAttributes with elevation in SetAttributes.
GoodSync 9.9.5.9
Изменения:
* Fix a crash when Auto-Analyze was erasing Sync Tree from previous Analyze/Sync.
* Fix update of state of Under-Runner job when it is taken from Runner into Full GUI.
Изменения:
* Fix a crash when Auto-Analyze was erasing Sync Tree from previous Analyze/Sync.
* Fix update of state of Under-Runner job when it is taken from Runner into Full GUI.
GoodSync 9.9.6.0
Изменения:
* Fix a crash when Auto-Analyze was erasing Sync Tree from previous Analyze/Sync.
* Fix update of state of Under-Runner job when it is taken from Runner into Full GUI.
* Add Office365 file system which is mostly SharePoint with OAuth2.
* OneDrivePro/SharePoint FS: Fix long URI problem with MoveFile and CopyFile.
* On File Change: fix First Full Analyze does not fully reset the sync tree.
* Job Status: improve showing correct visual job status.
* GoodSync Close: fix waiting for not-owned jobs (Full GUI vs Runner).
* Installer: when installer closes GoodSync, does not ask user whether to close.
* GS server Local Elevation: fix auth problem on reconnect after timeout.
* WinFileSys + Elevation: Local Account on GS server needs System User ID to SetFileOwner.
* WinFileSys: Use GetAttributes with elevation in SetAttributes.
Изменения:
* Fix a crash when Auto-Analyze was erasing Sync Tree from previous Analyze/Sync.
* Fix update of state of Under-Runner job when it is taken from Runner into Full GUI.
* Add Office365 file system which is mostly SharePoint with OAuth2.
* OneDrivePro/SharePoint FS: Fix long URI problem with MoveFile and CopyFile.
* On File Change: fix First Full Analyze does not fully reset the sync tree.
* Job Status: improve showing correct visual job status.
* GoodSync Close: fix waiting for not-owned jobs (Full GUI vs Runner).
* Installer: when installer closes GoodSync, does not ask user whether to close.
* GS server Local Elevation: fix auth problem on reconnect after timeout.
* WinFileSys + Elevation: Local Account on GS server needs System User ID to SetFileOwner.
* WinFileSys: Use GetAttributes with elevation in SetAttributes.
Предыдущая тема: ViewFD
Форум Ru-Board.club — поднят 15-09-2016 числа. Цель - сохранить наследие старого Ru-Board, истории становления российского интернета. Сделано для людей.