Пытаюсь установить дрова на видюху и не могу остановить xserver
команды init3 or init 3 нет,
отредактировал фаил /etc/inittab/
#
# inittab This file describes how the INIT process should set up
# the system in a certain run-level.
#
# Author: Miquel van Smoorenburg, <miquels@drinkel.nl.mugnet.org>
# Modified for RHS Linux by Marc Ewing and Donnie Barnes
#
# Default runlevel. The runlevels used by RHS are:
# 0 - halt (Do NOT set initdefault to this)
# 1 - Single user mode
# 2 - Multiuser, without NFS (The same as 3, if you do not have networking)
# 3 - Full multiuser mode
# 4 - unused
# 5 - X11
# 6 - reboot (Do NOT set initdefault to this)
#
id:3:initdefault:
# System initialization.
si::sysinit:/etc/rc.d/rc.sysinit
l0:0:wait:/etc/rc.d/rc 0
l1:1:wait:/etc/rc.d/rc 1
l2:2:wait:/etc/rc.d/rc 2
l3:3:wait:/etc/rc.d/rc 3
# l4:4:wait:/etc/rc.d/rc 4
# l5:5:wait:/etc/rc.d/rc 5
# l6:6:wait:/etc/rc.d/rc 6
# Trap CTRL-ALT-DELETE
ca::ctrlaltdel:/sbin/shutdown -t3 -r now
# When our UPS tells us power has failed, assume we have a few minutes
# of power left. Schedule a shutdown for 2 minutes from now.
# This does, of course, assume you have powerd installed and your
# UPS connected and working correctly.
pf::powerfail:/sbin/shutdown -f -h +2 "Power Failure; System Shutting Down"
# If power was restored before the shutdown kicked in, cancel it.
pr:123:powerokwait:/sbin/shutdown -c "Power Restored; Shutdown Cancelled"
# Run gettys in standard runlevels
1:2345:respawn:/sbin/mingetty tty1
2:2345:respawn:/sbin/mingetty tty2
3:2345:respawn:/sbin/mingetty tty3
# 4:2345:respawn:/sbin/mingetty tty4
# 5:2345:respawn:/sbin/mingetty tty5
# 6:2345:respawn:/sbin/mingetty tty6
# Run xdm in runlevel 3
x:3:respawn:/etc/X11/prefdm -nodaemon
Не помогает. Вроде при загрузке выдает консоль, требует ввести имя пользователя и пароль, но потом все равно подгружает графическую оболочку.
ОС CentOS 4.4
Кто может, помогите,
Добавлено:
Все справился. Строчку тоже надо было отключить.
x:3:respawn:/etc/X11/prefdm -nodaemon
команды init3 or init 3 нет,
отредактировал фаил /etc/inittab/
#
# inittab This file describes how the INIT process should set up
# the system in a certain run-level.
#
# Author: Miquel van Smoorenburg, <miquels@drinkel.nl.mugnet.org>
# Modified for RHS Linux by Marc Ewing and Donnie Barnes
#
# Default runlevel. The runlevels used by RHS are:
# 0 - halt (Do NOT set initdefault to this)
# 1 - Single user mode
# 2 - Multiuser, without NFS (The same as 3, if you do not have networking)
# 3 - Full multiuser mode
# 4 - unused
# 5 - X11
# 6 - reboot (Do NOT set initdefault to this)
#
id:3:initdefault:
# System initialization.
si::sysinit:/etc/rc.d/rc.sysinit
l0:0:wait:/etc/rc.d/rc 0
l1:1:wait:/etc/rc.d/rc 1
l2:2:wait:/etc/rc.d/rc 2
l3:3:wait:/etc/rc.d/rc 3
# l4:4:wait:/etc/rc.d/rc 4
# l5:5:wait:/etc/rc.d/rc 5
# l6:6:wait:/etc/rc.d/rc 6
# Trap CTRL-ALT-DELETE
ca::ctrlaltdel:/sbin/shutdown -t3 -r now
# When our UPS tells us power has failed, assume we have a few minutes
# of power left. Schedule a shutdown for 2 minutes from now.
# This does, of course, assume you have powerd installed and your
# UPS connected and working correctly.
pf::powerfail:/sbin/shutdown -f -h +2 "Power Failure; System Shutting Down"
# If power was restored before the shutdown kicked in, cancel it.
pr:123:powerokwait:/sbin/shutdown -c "Power Restored; Shutdown Cancelled"
# Run gettys in standard runlevels
1:2345:respawn:/sbin/mingetty tty1
2:2345:respawn:/sbin/mingetty tty2
3:2345:respawn:/sbin/mingetty tty3
# 4:2345:respawn:/sbin/mingetty tty4
# 5:2345:respawn:/sbin/mingetty tty5
# 6:2345:respawn:/sbin/mingetty tty6
# Run xdm in runlevel 3
x:3:respawn:/etc/X11/prefdm -nodaemon
Не помогает. Вроде при загрузке выдает консоль, требует ввести имя пользователя и пароль, но потом все равно подгружает графическую оболочку.
ОС CentOS 4.4
Кто может, помогите,
Добавлено:
Все справился. Строчку тоже надо было отключить.
x:3:respawn:/etc/X11/prefdm -nodaemon